This is only used by one board and should not be a CONFIG option. Instead it should use the driver model pmic framework. For now, just move the setting into the only board that uses it.
Signed-off-by: Simon Glass <[email protected]> --- board/gateworks/gw_ventana/common.c | 7 ++++--- include/configs/gw_ventana.h | 1 - scripts/config_whitelist.txt | 1 - 3 files changed, 4 insertions(+), 5 deletions(-) diff --git a/board/gateworks/gw_ventana/common.c b/board/gateworks/gw_ventana/common.c index 56a7b3e7fd..d27bd57648 100644 --- a/board/gateworks/gw_ventana/common.c +++ b/board/gateworks/gw_ventana/common.c @@ -1272,14 +1272,15 @@ void setup_pmic(void) struct pmic *p; struct ventana_board_info ventana_info; int board = read_eeprom(CONFIG_I2C_GSC, &ventana_info); + const int i2c_pmic = 1; u32 reg; - i2c_set_bus_num(CONFIG_I2C_PMIC); + i2c_set_bus_num(i2c_pmic); /* configure PFUZE100 PMIC */ if (!i2c_probe(CONFIG_POWER_PFUZE100_I2C_ADDR)) { debug("probed PFUZE100@0x%x\n", CONFIG_POWER_PFUZE100_I2C_ADDR); - power_pfuze100_init(CONFIG_I2C_PMIC); + power_pfuze100_init(i2c_pmic); p = pmic_get("PFUZE100"); if (p && !pmic_probe(p)) { pmic_reg_read(p, PFUZE100_DEVICEID, ®); @@ -1302,7 +1303,7 @@ void setup_pmic(void) /* configure LTC3676 PMIC */ else if (!i2c_probe(CONFIG_POWER_LTC3676_I2C_ADDR)) { debug("probed LTC3676@0x%x\n", CONFIG_POWER_LTC3676_I2C_ADDR); - power_ltc3676_init(CONFIG_I2C_PMIC); + power_ltc3676_init(i2c_pmic); p = pmic_get("LTC3676_PMIC"); if (!p || pmic_probe(p)) return; diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index 2b98f535c6..28289a348f 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -95,7 +95,6 @@ #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ #define CONFIG_SYS_I2C_SPEED 100000 #define CONFIG_I2C_GSC 0 -#define CONFIG_I2C_PMIC 1 #define CONFIG_I2C_EDID /* MMC Configs */ diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 68085c75fc..e593967e28 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -1400,7 +1400,6 @@ CONFIG_I2C_MVTWSI_BASE3 CONFIG_I2C_MVTWSI_BASE4 CONFIG_I2C_MVTWSI_BASE5 CONFIG_I2C_MXC -CONFIG_I2C_PMIC CONFIG_I2C_REPEATED_START CONFIG_I2C_RTC_ADDR CONFIG_I2C_TIMEOUT -- 2.13.0.rc0.306.g87b477812d-goog _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
