Hello Jernej,
Am 27.04.2017 um 00:03 schrieb Jernej Skrabec:
Driver for that regulator is used only in SPL and it uses old I2C
interface. If we want to use DM I2C in U-Boot proper, compilation of
this driver has to be limited only to SPL.
Signed-off-by: Jernej Skrabec <jernej.skra...@siol.net>
---
drivers/power/sy8106a.c | 2 ++
1 file changed, 2 insertions(+)
Reviewed-by: Heiko Schocher <h...@denx.de>
bye,
Heiko
diff --git a/drivers/power/sy8106a.c b/drivers/power/sy8106a.c
index bbf116f655..f9db3965f2 100644
--- a/drivers/power/sy8106a.c
+++ b/drivers/power/sy8106a.c
@@ -12,6 +12,7 @@
#define SY8106A_VOUT1_SEL 1
#define SY8106A_VOUT1_SEL_ENABLE (1 << 7)
+#ifdef CONFIG_SPL_BUILD
static u8 sy8106a_mvolt_to_cfg(int mvolt, int min, int max, int div)
{
if (mvolt < min)
@@ -27,3 +28,4 @@ int sy8106a_set_vout1(unsigned int mvolt)
u8 data = sy8106a_mvolt_to_cfg(mvolt, 680, 1950, 10) |
SY8106A_VOUT1_SEL_ENABLE;
return i2c_write(SY8106A_I2C_ADDR, SY8106A_VOUT1_SEL, 1, &data, 1);
}
+#endif
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
