On Mon, May 1, 2017 at 6:02 PM, Simon Glass <s...@chromium.org> wrote:
> Hi Matthew, > > On 1 May 2017 at 14:30, Matthew Gorski <matt.gor...@gmail.com> wrote: > > > > > > On Mon, May 1, 2017 at 2:36 PM, Simon Glass <s...@chromium.org> wrote: > >> > >> Hi Matthew, > >> > >> On 1 May 2017 at 11:26, Matthew Gorski <matt.gor...@gmail.com> wrote: > >> > > >> > > >> > > >> > On Mon, May 1, 2017 at 1:03 PM, Simon Glass <s...@chromium.org> wrote: > >> >> > >> >> Hi Matthew, > >> >> > >> >> On 1 May 2017 at 10:40, Matthew Gorski <matt.gor...@gmail.com> > wrote: > >> >> > Let me repost this to the bottom. New to the mailing list ;) > >> >> > > >> >> > I am using chained boot to test uboot as a FIT image so I I don't > >> >> > have to > >> >> > flash to spl flash. Does CONFIG_SPL_TEXT_BASE need to be adjusted > >> >> > for > >> >> > chained boot? > >> >> > > >> >> > I am using instructions to boot Linux for Tegra from sdcard/USB in > >> >> > developer > >> >> > mode. I can boot L4T fine with kernel v3.10. > >> >> > > >> >> > What mainline branch should I try? > >> >> > >> >> There's only one mainline, here: > >> >> http://git.denx.de/?p=u-boot.git;a=summary > >> >> > >> >> There are various custodian branches but I don't believe the tegra > one > >> >> has anything different from mainline at present. > >> >> > >> >> - Simon > >> >> > >> > I will give mainline a try with: > >> > > >> > CONFIG_SYS_TEXT_BASE 0x8010E000 > >> > and > >> > > >> > CONFIG_SPL_TEXT_BASE 0x80108000 > >> > > >> > > >> > I know I will also need: > >> > > >> > > >> > CONFIG_DISPLAY_PORT=y > >> > >> Do you mean CONFIG_DISPLAY? If so, it is already defined. > >> > >> > CONFIG_VIDEO_TEGRA124=y > >> > >> That is defined in mainline > >> > >> > > >> > > >> > for the console to display command prompt. > >> > > >> > > >> > The FIT config I am using is from > >> > here:https://git.collabora.com/cgit/user/tomeu/u-boot. > git/commit/?h=nyan-big > >> > > >> > > >> > Do I need to adjust: > >> > > >> > > >> > load = <0>; > >> > entry = <0>; > >> > > >> > > >> > /dts-v1/; > >> > > >> > / { > >> > description = "U-Boot + FDT --------- THIS PADDING IS NEEDED SO > THE > >> > IMAGE STARTS AT THE RIGHT OFFSET"; > >> > >> Perhaps you need to adjust this? How was the length of it calcualted? > > > > > > I am really not sure how the padding was calculated. I just assumed this > > kernel-big.its FIT config was correct for nyan_big. I will try using my > > working linux kernel fit config. > >> > >> > >> > #address-cells = <1>; > >> > images { > >> > kernel@1{ > >> > description = "kernel"; > >> > data = /incbin/("u-boot-dtb.bin"); > >> > type = "kernel_noload"; > >> > arch = "arm"; > >> > os = "linux"; > >> > compression = "none"; > >> > load = <0>; > >> > entry = <0>; > >> > }; > >> > fdt@1{ > >> > description = "tegra124-nyan-big.dtb"; > >> > data = /incbin/("dts/dt.dtb"); > >> > type = "flat_dt"; > >> > arch = "arm"; > >> > compression = "none"; > >> > hash@1{ > >> > algo = "sha1"; > >> > }; > >> > }; > >> > }; > >> > configurations { > >> > default = "conf@1"; > >> > conf@1{ > >> > kernel = "kernel@1"; > >> > fdt = "fdt@1"; > >> > }; > >> > }; > >> > }; > >> > > >> > > >> > please let me know if I should also adjust the SPL CONFIG even though > I > >> > am chainbooting uboot: > >> > > >> > > >> > https://www.chromium.org/chromium-os/firmware-porting- > guide/using-nv-u-boot-on-the-samsung-arm-chromebook#TOC- > Installing-nv-U-Boot-chained-U-Boot-method- > >> > >> This is exynos, where we booted directly into U-Boot. Actually I'm > >> wondering we should boot directly into U-Boot (instead of SPL) on nyan > >> also. Perhaps someone at collabora would know? Did you search the > >> mailing list? > >> > >> Regards, > >> Simon > > > > > > I have not searched the mailing list. What should I search for? Booting > > nyan to u-boot directly bypassing SPL? > > Here are two subjects to search for: > > Veyron-speedy u-boot > [PATCH 0/20] tegra: Expand Nyan-big support > > Regards, > Simon > Very odd if I do not use "#address-cells = <1>;" the display flashes and reboots into recovery but if I do use #address-cells = <1>; in my FIT config I get a blank screen so something is working when not using the padding. /dts-v1/; / { description = "Chrome OS nyan u-boot chain boot method"; #address-cells = <1>; images { kernel@1{ > >> > >> > >> >> > >> >> > > >> >> > On May 1, 2017 12:11 PM, "Matthew Gorski" <matt.gor...@gmail.com> > >> >> > wrote: > >> >> > > >> >> > On May 1, 2017 11:45 AM, "Simon Glass" <s...@chromium.org> wrote: > >> >> > > >> >> > Hi Matthew, > >> >> > > >> >> > On 1 May 2017 at 09:37, Matthew Gorski <matt.gor...@gmail.com> > wrote: > >> >> >> Thanks for the reply Simon. > >> >> >> > >> >> >> I have been trying to find the System.map for depthcharge to see > the > >> >> >> kernel > >> >> >> load address but I am unable to find anything. I have tried > >> >> >> multiple > >> >> >> CONFIG_SYS_TEXT_BASE settings with no luck. > >> >> > > >> >> > How did you choose what to use? Also note that Tegra uses SPL to > >> >> > start, so you may need to adjust CONFIG_SPL_TEXT_BASE instead. > >> >> > > >> >> >> > >> >> >> I am creating my sdcard with a standard linux (Linux for Tegra) > >> >> >> rootfs: > >> >> > > >> >> > Did these instructions come from a web site somewhere? > >> >> > > >> >> >> > >> >> >> Partition an SD card > >> >> >> > >> >> >> sudo cgpt create <MMC BLOCK DEVICE> > >> >> >> sudo cgpt add -b 34 -s 32768 -P 1 -S 1 -t kernel <MMC BLOCK > DEVICE> > >> >> >> # 16 > >> >> >> MB > >> >> >> kernel image partition > >> >> >> sudo cgpt add -b 32802 -s <ROOT PARTITION SIZE in 512B sectors> -t > >> >> >> rootfs > >> >> >> <MMC BLOCK DEVICE> > >> >> >> > >> >> >> cgpt doesn't seem to create a protective MBR. If one is not > already > >> >> >> in > >> >> >> place, it can be created with: > >> >> >> > >> >> >> sudo gdisk <MMC BLOCK DEVICE> # and enter command w > >> >> >> > >> >> >> Copy data to the SD card > >> >> >> > >> >> >> sudo dd if=./kernelpart.bin of=<MMC BLOCK DEVICE>p1 > >> >> >> sudo mkfs.ext4 <MMC BLOCK DEVICE>p2 > >> >> >> sudo mount <MMC BLOCK DEVICE>p2 /mnt/ > >> >> >> > >> >> > > >> >> > How are you actually making it boot? Is this in dev mode with USB > >> >> > boot > >> >> > enabled and pressing Ctrl-U? > >> >> > > >> >> > Also, as this is a mailing list, please avoid top-posting. > >> >> > > >> >> > - Simon > >> >> > > >> >> > I am using chained boot to test uboot as a FIT image so I I don't > >> >> > have to > >> >> > flash to spl flash. Does CONFIG_SPL_TEXT_BASE need to be adjusted > >> >> > for > >> >> > chained boot? > >> >> > > >> >> > I am using instructions to boot Linux for Tegra from sdcard/USB in > >> >> > developer > >> >> > mode. I can boot L4T fine with kernel v3.10. > >> >> > > >> >> > What mainline branch should I try? > >> >> > > >> >> > > >> >> >> > >> >> >> On Mon, May 1, 2017 at 11:14 AM, Simon Glass <s...@chromium.org> > >> >> >> wrote: > >> >> >>> > >> >> >>> Hi Matthew, > >> >> >>> > >> >> >>> On 1 May 2017 at 08:43, Matthew Gorski <matt.gor...@gmail.com> > >> >> >>> wrote: > >> >> >>> > I am porting u-boot to nyan_big and need some input. I have > been > >> >> >>> > searching > >> >> >>> > high and low and found this thread here: [U-Boot] [PATCH 0/20] > >> >> >>> > tegra: > >> >> >>> > Expand > >> >> >>> > Nyan-big support > >> >> >>> > > >> >> >>> > https://lists.denx.de/pipermail/u-boot/2015-March/209530.html > >> >> >>> > > >> >> >>> > I have tried to build u-boot with the branch here: > >> >> >>> > > >> >> >>> > > >> >> >>> > https://git.collabora.com/cgit/user/tomeu/u-boot.git/ > commit/?h=nyan-big > >> >> >>> > > >> >> >>> > and also the official chromium next branch > >> >> >>> > >> >> >>> Have you tried mainline U-Boot? It already supports nyan-big. I'm > >> >> >>> not > >> >> >>> sure about the situation with the downstream trees. > >> >> >>> > >> >> >>> > > >> >> >>> > I followed building instructions here: > >> >> >>> > > >> >> >>> > > >> >> >>> > > >> >> >>> > https://www.chromium.org/chromium-os/firmware-porting- > guide/using-nv-u-boot-on-the-samsung-arm-chromebook > >> >> >>> > > >> >> >>> > I build with these commands: > >> >> >>> > > >> >> >>> > mkimage -e 0x81000100 -a 0x81000100 -f kernel-big.its > >> >> >>> > kernel-u-boot > >> >> >>> > > >> >> >>> > (with and without the load address setting) > >> >> >>> > > >> >> >>> > vbutil_kernel --arch arm --pack kernel.bin --keyblock > >> >> >>> > /usr/share/vboot/devkeys/kernel.keyblock --signprivate > >> >> >>> > /usr/share/vboot/devkeys/kernel_data_key.vbprivk --version 1 > >> >> >>> > --config > >> >> >>> > dummy.txt --vmlinuz kernel-u-boot --bootloader dummy.txt > >> >> >>> > > >> >> >>> > I have had numerous failed attempts to boot uboot from sdcard > >> >> >>> > mmcblk1p1 > >> >> >>> > > >> >> >>> > Any help is appreciated I have only gotten a blank screen after > >> >> >>> > weeks > >> >> >>> > of > >> >> >>> > flashing. I can boot custom v3.10 kernels so I assume I am > using > >> >> >>> > the > >> >> >>> > correct building procedure. Thanks in advance for help from > the > >> >> >>> > u-boot > >> >> >>> > community. > >> >> >>> > >> >> >>> It is possible that it needs a particular address due to > >> >> >>> limitations > >> >> >>> in the FIT support on Nyan. I'm not sure what it is but might be > >> >> >>> able > >> >> >>> to take a look at some point. > >> >> >>> > >> >> >>> How are you building your SD card? Are you following some > >> >> >>> instructions > >> >> >>> from somewhere? > >> >> >>> > >> >> >>> Regards, > >> >> >>> Simon > >> >> >> > >> >> >> > >> >> > > >> >> > > >> >> > > >> > > >> > > > > > > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot