On 04/05/17 14:47, Jorge Ramirez-Ortiz wrote:
diff --git a/include/configs/poplar.h b/include/configs/poplar.h new file mode 100644 index 0000000..fb0ca19 --- /dev/null +++ b/include/configs/poplar.h @@ -0,0 +1,113 @@ +/* + * (C) Copyright 2017 Linaro + * + * Jorge Ramirez-Ortiz <jorge.ramirez-or...@linaro.org> + * + * Configuration for Poplar 96boards CE. Parts were derived from other ARM + * configurations. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _POPLAR_H_ +#define _POPLAR_H_ + +#include <linux/sizes.h> + +/* network config */ +#define CONFIG_NET_MULTI 1 +#define CONFIG_PHY_GIGE 1 +#define CONFIG_ARP_TIMEOUT 500000L +#define CONFIG_NET_RETRY_COUNT 50 +#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 1 +#define CONFIG_SYS_RX_ETH_BUFFER 16 +#define CONFIG_NET_RANDOM_ETHADDR + +/* memory */ +#define PHYS_SDRAM_1 0x00000000 +#define PHYS_SDRAM_1_SIZE 0x40000000 +#define CONFIG_NR_DRAM_BANKS 4 +#define DRAM_BANK_SIZE 0x10000000 + +/* sys */ +#define CONFIG_SYS_BOOTM_LEN 0x1400000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x100000 +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_SP_ADDR (PHYS_SDRAM_1 + 0x200000) +#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x800000) +#define CONFIG_SYS_MALLOC_LEN (PHYS_SDRAM_1 + SZ_8M) + +/* must match bl33.bin load address */ +#define CONFIG_SYS_TEXT_BASE 0x37000000 + +/* generic gimer */ +#define COUNTER_FREQUENCY 19000000 + +/* generic interrupt controller definitions */ +#define GICD_BASE 0xF1001000 +#define GICC_BASE 0xF1002000 + +/* serial port PL010/PL011 */ +#define CONFIG_PL01X_SERIAL + +/* USB configuration */ +#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 +#define CONFIG_SYS_USB_EVENT_POLL +#define CONFIG_USB_ETHER_SMSC95XX +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX + +/* SD/MMC configuration */ +#define CONFIG_BOUNCE_BUFFER +/***************************************************************************** + * Initial environment variables + *****************************************************************************/ + +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_SERVERIP 192.168.1.4 +#define CONFIG_GATEWAYIP 192.168.1.1 + +#define BOOT_TARGET_DEVICES(func) \ + func(USB, usb, 0) \ + func(MMC, mmc, 0) \ + func(DHCP, dhcp, na) + +#ifndef CONFIG_SPL_BUILD +#include <config_distro_defaults.h> +#include <config_distro_bootcmd.h> +#endif + + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loader_mmc_blknum=0x0\0" \ + "loader_mmc_nblks=0x780\0" \ + "env_mmc_blknum=0xF0000\0" \
Shouldn't this be 0x780 (i.e. a blknum rather than bytes)
+ "env_mmc_nblks=0x80\0" \ + "kernel_addr_r=0x30000000\0" \ + "pxefile_addr_r=0x32000000\0" \ + "scriptaddr=0x32000000\0" \ + "fdt_addr_r=0x32200000\0" \ + "ramdisk_addr_r=0x32400000\0" \ + BOOTENV + + +/* Command line configuration */ +#define CONFIG_ENV_IS_IN_MMC 1 +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_ENV_OFFSET 0xF0000 /* env_mmc_blknum */ +#define CONFIG_ENV_SIZE 0x10000 /* env_mmc_nblks bytes */
Possibly express these are (0x780 * 512) to make absolutely explicit the relationship to the blknum/nblks values?
+#define CONFIG_CMD_ENV +#define CONFIG_FAT_WRITE +#define CONFIG_ENV_VARS_UBOOT_CONFIG + +/* Monitor Command Prompt */ +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_CBSIZE 512 +#define CONFIG_SYS_MAXARGS 64 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#endif /* _POPLAR_H_ */
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
