On Wed, May 17, 2017 at 04:46:29PM +0200, Jean-Jacques Hiblot wrote:
>
>
> On 17/05/2017 15:04, Tom Rini wrote:
> >On Wed, May 17, 2017 at 01:55:56PM +0200, Jean-Jacques Hiblot wrote:
> >
> >>SDIO is not supported in u-boot, there is no point in enabling mmc3.
> >>
> >>Signed-off-by: Jean-Jacques Hiblot <jjhib...@ti.com>
> >>---
> >>
> >>Tom,
> >>
> >>this will fix the problem youreported with commit
> >>b5511d6cb8dc601efc14b8cf60755
> >>on am335x-evm. For the record, the problem is that the clock of mmc 3 is not
> >>enbled by the arch code. With DM_MMC enabled, mmc3 gets probed and u-boot
> >>crashes
> >>when mmc3's registers are accessed for the first time.
> >>
> >>Jean-Jacques
> >>
> >>
> >> arch/arm/dts/am335x-evm.dts | 4 +++-
> >> 1 file changed, 3 insertions(+), 1 deletion(-)
> >>
> >>diff --git a/arch/arm/dts/am335x-evm.dts b/arch/arm/dts/am335x-evm.dts
> >>index a6f20af..e94fcad 100644
> >>--- a/arch/arm/dts/am335x-evm.dts
> >>+++ b/arch/arm/dts/am335x-evm.dts
> >>@@ -721,12 +721,14 @@
> >> };
> >> &mmc3 {
> >>+ /* disable MMC3 as SDIO is not supported in U-Boot */
> >>+ status = "disabled";
> >>+
> >> /* these are on the crossbar and are outlined in the
> >> xbar-event-map element */
> >> dmas = <&edma 12
> >> &edma 13>;
> >> dma-names = "tx", "rx";
> >>- status = "okay";
> >> vmmc-supply = <&wlan_en_reg>;
> >> bus-width = <4>;
> >> pinctrl-names = "default";
> >Please put this into arch/arm/dts/am335x-evm-u-boot.dtsi instead,
> I tried and it doesn't work. The XXX-u-boot.dtsi being included at
> the beginning of the DTS, it cannot override the
> 'status = "okay"' present in am335x-evm.dts.OK, I've manually confirmed that https://patchwork.ozlabs.org/patch/763654/ does what I expect (and you were suggesting too), can you please test that with a patch that adds am335x-evm-u-boot.dtsi? Thanks again! -- Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
