Previous to MC v10.x, port mac address was specified via DPL. Since
newer MC versions are compatible with old style DPLs, make the u-boot
env mac addresses visible there. This applies only to DPLs that have an
older version.

DPLs use 32 bit values for specifying MAC addresses. U-boot environment
variables take precedence over the MAC addresses already visible in the
DPL/DPC.

Signed-off-by: Bogdan Purcareata <bogdan.purcare...@nxp.com>
Signed-off-by: Heinz Wrobel <heinz.wro...@nxp.com>
---
 drivers/net/fsl-mc/mc.c | 260 ++++++++++++++++++++++++++++++++++++------------
 1 file changed, 197 insertions(+), 63 deletions(-)

diff --git a/drivers/net/fsl-mc/mc.c b/drivers/net/fsl-mc/mc.c
index afaf285..aaa887f 100644
--- a/drivers/net/fsl-mc/mc.c
+++ b/drivers/net/fsl-mc/mc.c
@@ -155,19 +155,144 @@ int parse_mc_firmware_fit_image(u64 mc_fw_addr,
 }
 #endif
 
-static int mc_fixup_dpc_mac_addr(void *blob, int noff, int dpmac_id,
-               struct eth_device *eth_dev)
+#define MC_DT_INCREASE_SIZE    64
+
+enum mc_fixup_type {
+       MC_FIXUP_DPL,
+       MC_FIXUP_DPC
+};
+
+static int mc_fixup_mac_addr(void *blob, int nodeoffset,
+                            const char *propname, struct eth_device *eth_dev,
+                            enum mc_fixup_type type)
 {
-       int nodeoffset, err = 0;
+       int err = 0, len, size, i;
+       unsigned char env_enetaddr[ARP_HLEN];
+       unsigned int enetaddr_32[ARP_HLEN];
+       void *val;
+
+       switch (type) {
+       case MC_FIXUP_DPL:
+       /* DPL likes its addresses on 32 * ARP_HLEN bits */
+       for (i = 0; i < ARP_HLEN; i++)
+               enetaddr_32[i] = cpu_to_fdt32(eth_dev->enetaddr[i]);
+       val = enetaddr_32;
+       len = sizeof(enetaddr_32);
+       break;
+
+       case MC_FIXUP_DPC:
+       val = eth_dev->enetaddr;
+       len = ARP_HLEN;
+       break;
+       }
+
+       /* MAC address property present */
+       if (fdt_get_property(blob, nodeoffset, propname, NULL)) {
+               /* u-boot MAC addr randomly assigned - leave the present one */
+               if (!eth_getenv_enetaddr_by_index("eth", eth_dev->index,
+                                                 env_enetaddr))
+                       return err;
+       } else {
+               size = MC_DT_INCREASE_SIZE + strlen(propname) + len;
+               /* make room for mac address property */
+               err = fdt_increase_size(blob, size);
+               if (err) {
+                       printf("fdt_increase_size: err=%s\n",
+                              fdt_strerror(err));
+                       return err;
+               }
+       }
+
+       err = fdt_setprop(blob, nodeoffset, propname, val, len);
+       if (err) {
+               printf("fdt_setprop: err=%s\n", fdt_strerror(err));
+               return err;
+       }
+
+       return err;
+}
+
+#define is_dpni(s) (s != NULL ? !strncmp(s, "dpni@", 5) : 0)
+
+const char *dpl_get_connection_endpoint(void *blob, char *endpoint)
+{
+       int connoffset = fdt_path_offset(blob, "/connections"), off;
+       const char *s1, *s2;
+
+       for (off = fdt_first_subnode(blob, connoffset);
+            off >= 0;
+            off = fdt_next_subnode(blob, off)) {
+               s1 = fdt_stringlist_get(blob, off, "endpoint1", 0, NULL);
+               s2 = fdt_stringlist_get(blob, off, "endpoint2", 0, NULL);
+
+               if (!s1 || !s2)
+                       continue;
+
+               if (strcmp(endpoint, s1) == 0)
+                       return s2;
+
+               if (strcmp(endpoint, s2) == 0)
+                       return s1;
+       }
+
+       return NULL;
+}
+
+static int mc_fixup_dpl_mac_addr(void *blob, int dpmac_id,
+                                struct eth_device *eth_dev)
+{
+       int objoff = fdt_path_offset(blob, "/objects");
+       int dpmacoff = -1, dpnioff = -1;
+       const char *endpoint;
        char mac_name[10];
-       const char link_type_mode[] = "FIXED_LINK";
-       unsigned char env_enetaddr[6];
+       int err;
+
+       sprintf(mac_name, "dpmac@%d", dpmac_id);
+       dpmacoff = fdt_subnode_offset(blob, objoff, mac_name);
+       if (dpmacoff < 0)
+               /* dpmac not defined in DPL, so skip it. */
+               return 0;
+
+       printf("Fixing up mac addr for %s\n", mac_name);
+       err = mc_fixup_mac_addr(blob, dpmacoff, "mac_addr", eth_dev,
+                               MC_FIXUP_DPL);
+       if (err) {
+               printf("Error fixing up dpmac mac_addr in DPL\n");
+               return err;
+       }
+
+       /* Now we need to figure out if there is any
+        * DPNI connected to this MAC, so we walk the
+        * connection list
+        */
+       endpoint = dpl_get_connection_endpoint(blob, mac_name);
+       if (!is_dpni(endpoint))
+               return 0;
+
+       /* let's see if we can fixup the DPNI as well */
+       printf("Checking connection %s <=> %s\n", mac_name, endpoint);
+       dpnioff = fdt_subnode_offset(blob, objoff, endpoint);
+       if (dpnioff < 0)
+               /* DPNI not defined in DPL in the objects area */
+               return 0;
+
+       return mc_fixup_mac_addr(blob, dpnioff, "mac_addr", eth_dev,
+                                MC_FIXUP_DPL);
+}
+
+static int mc_fixup_dpc_mac_addr(void *blob, int dpmac_id,
+                                struct eth_device *eth_dev)
+{
+       int nodeoffset = fdt_path_offset(blob, "/board_info/ports"), noff;
+       int err = 0;
+       char mac_name[10];
+       const char link_type_mode[] = "MAC_LINK_TYPE_FIXED";
 
        sprintf(mac_name, "mac@%d", dpmac_id);
 
        /* node not found - create it */
-       nodeoffset = fdt_subnode_offset(blob, noff, (const char *) mac_name);
-       if (nodeoffset < 0) {
+       noff = fdt_subnode_offset(blob, nodeoffset, (const char *)mac_name);
+       if (noff < 0) {
                err = fdt_increase_size(blob, 200);
                if (err) {
                        printf("fdt_increase_size: err=%s\n",
@@ -175,10 +300,15 @@ static int mc_fixup_dpc_mac_addr(void *blob, int noff, 
int dpmac_id,
                        return err;
                }
 
-               nodeoffset = fdt_add_subnode(blob, noff, mac_name);
+               noff = fdt_add_subnode(blob, nodeoffset, mac_name);
+               if (noff < 0) {
+                       printf("fdt_add_subnode: err=%s\n",
+                              fdt_strerror(err));
+                       return err;
+               }
 
                /* add default property of fixed link */
-               err = fdt_appendprop_string(blob, nodeoffset,
+               err = fdt_appendprop_string(blob, noff,
                                            "link_type", link_type_mode);
                if (err) {
                        printf("fdt_appendprop_string: err=%s\n",
@@ -187,49 +317,53 @@ static int mc_fixup_dpc_mac_addr(void *blob, int noff, 
int dpmac_id,
                }
        }
 
-       /* port_mac_address property present in DPC */
-       if (fdt_get_property(blob, nodeoffset, "port_mac_address", NULL)) {
-               /* MAC addr randomly assigned - leave the one in DPC */
-               eth_getenv_enetaddr_by_index("eth", eth_dev->index,
-                                               env_enetaddr);
-               if (is_zero_ethaddr(env_enetaddr))
-                       return err;
+       return mc_fixup_mac_addr(blob, noff, "port_mac_address", eth_dev,
+                                MC_FIXUP_DPC);
+}
 
-               /* replace DPC MAC address with u-boot env one */
-               err = fdt_setprop(blob, nodeoffset, "port_mac_address",
-                                 eth_dev->enetaddr, 6);
-               if (err) {
-                       printf("fdt_setprop mac: err=%s\n", fdt_strerror(err));
-                       return err;
-               }
+static int mc_fixup_mac_addrs(void *blob, enum mc_fixup_type type)
+{
+       int i, err = 0, ret = 0;
+       char ethname[10];
+       struct eth_device *eth_dev;
 
-               return 0;
-       }
+       for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++) {
+               /* port not enabled */
+               if ((wriop_is_enabled_dpmac(i) != 1) ||
+                   (wriop_get_phy_address(i) == -1))
+                       continue;
 
-       /* append port_mac_address property to mac node in DPC */
-       err = fdt_increase_size(blob, 80);
-       if (err) {
-               printf("fdt_increase_size: err=%s\n", fdt_strerror(err));
-               return err;
-       }
+               sprintf(ethname, "DPMAC%d@%s", i,
+                       phy_interface_strings[wriop_get_enet_if(i)]);
 
-       err = fdt_appendprop(blob, nodeoffset,
-                            "port_mac_address", eth_dev->enetaddr, 6);
-       if (err) {
-               printf("fdt_appendprop: err=%s\n", fdt_strerror(err));
-               return err;
+               eth_dev = eth_get_dev_by_name(ethname);
+               if (eth_dev == NULL)
+                       continue;
+
+               switch (type) {
+               case MC_FIXUP_DPL:
+                       err = mc_fixup_dpl_mac_addr(blob, i, eth_dev);
+                       break;
+               case MC_FIXUP_DPC:
+                       err = mc_fixup_dpc_mac_addr(blob, i, eth_dev);
+                       break;
+               default:
+                       break;
+               }
+
+               if (err)
+                       printf("fsl-mc: ERROR fixing mac address for %s\n",
+                              ethname);
+               ret |= err;
        }
 
-       return err;
+       return ret;
 }
 
 static int mc_fixup_dpc(u64 dpc_addr)
 {
        void *blob = (void *)dpc_addr;
        int nodeoffset, err = 0;
-       char ethname[10];
-       struct eth_device *eth_dev;
-       int i;
 
        /* delete any existing ICID pools */
        nodeoffset = fdt_path_offset(blob, "/resources/icid_pools");
@@ -254,30 +388,9 @@ static int mc_fixup_dpc(u64 dpc_addr)
        /* fixup MAC addresses for dpmac ports */
        nodeoffset = fdt_path_offset(blob, "/board_info/ports");
        if (nodeoffset < 0)
-               goto out;
-
-       for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++) {
-               /* port not enabled */
-               if ((wriop_is_enabled_dpmac(i) != 1) ||
-                   (wriop_get_phy_address(i) == -1))
-                       continue;
-
-               sprintf(ethname, "DPMAC%d@%s", i,
-                       phy_interface_strings[wriop_get_enet_if(i)]);
-
-               eth_dev = eth_get_dev_by_name(ethname);
-               if (eth_dev == NULL)
-                       continue;
-
-               err = mc_fixup_dpc_mac_addr(blob, nodeoffset, i, eth_dev);
-               if (err) {
-                       printf("mc_fixup_dpc_mac_addr failed: err=%s\n",
-                       fdt_strerror(err));
-                       goto out;
-               }
-       }
+               return 0;
 
-out:
+       err = mc_fixup_mac_addrs(blob, MC_FIXUP_DPC);
        flush_dcache_range(dpc_addr, dpc_addr + fdt_totalsize(blob));
 
        return err;
@@ -340,6 +453,25 @@ static int load_mc_dpc(u64 mc_ram_addr, size_t 
mc_ram_size, u64 mc_dpc_addr)
        return 0;
 }
 
+
+static int mc_fixup_dpl(u64 dpl_addr)
+{
+       void *blob = (void *)dpl_addr;
+       u32 ver = fdt_getprop_u32_default(blob, "/", "dpl-version", 0);
+       int err = 0;
+
+       /* The DPL fixup for mac addresses is only relevant
+        * for old-style DPLs
+        */
+       if (ver >= 10)
+               return 0;
+
+       err = mc_fixup_mac_addrs(blob, MC_FIXUP_DPL);
+       flush_dcache_range(dpl_addr, dpl_addr + fdt_totalsize(blob));
+
+       return err;
+}
+
 static int load_mc_dpl(u64 mc_ram_addr, size_t mc_ram_size, u64 mc_dpl_addr)
 {
        u64 mc_dpl_offset;
@@ -386,6 +518,8 @@ static int load_mc_dpl(u64 mc_ram_addr, size_t mc_ram_size, 
u64 mc_dpl_addr)
                      (u64)dpl_fdt_hdr, dpl_size, mc_ram_addr + mc_dpl_offset);
 #endif /* not defined CONFIG_SYS_LS_MC_DPL_IN_DDR */
 
+       if (mc_fixup_dpl(mc_ram_addr + mc_dpl_offset))
+               return -EINVAL;
        dump_ram_words("DPL", (void *)(mc_ram_addr + mc_dpl_offset));
        return 0;
 }
-- 
1.9.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to