2017. 5. 17. 23:53에 "Simon Glass" <s...@chromium.org>님이 작성:
This is not used anymore. Drop it.
Signed-off-by: Simon Glass <s...@chromium.org>
---
drivers/mtd/nand/Makefile | 1 -
drivers/mtd/nand/s3c2410_nand.c | 175 ------------------------------
----------
2 files changed, 176 deletions(-)
delete mode 100644 drivers/mtd/nand/s3c2410_nand.c
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 82358f674b..5d5f9f5267 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -59,7 +59,6 @@ obj-$(CONFIG_NAND_MXC) += mxc_nand.o
obj-$(CONFIG_NAND_MXS) += mxs_nand.o
obj-$(CONFIG_NAND_NDFC) += ndfc.o
obj-$(CONFIG_NAND_PXA3XX) += pxa3xx_nand.o
-obj-$(CONFIG_NAND_S3C2410) += s3c2410_nand.o
obj-$(CONFIG_NAND_SPEAR) += spr_nand.o
obj-$(CONFIG_TEGRA_NAND) += tegra_nand.o
obj-$(CONFIG_NAND_OMAP_GPMC) += omap_gpmc.o
diff --git a/drivers/mtd/nand/s3c2410_nand.c b/drivers/mtd/nand/s3c2410_nan
d.c
deleted file mode 100644
index dd742a6351..0000000000
--- a/drivers/mtd/nand/s3c2410_nand.c
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- * (C) Copyright 2006 OpenMoko, Inc.
- * Author: Harald Welte <lafo...@openmoko.org>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-
-#include <nand.h>
-#include <asm/arch/s3c24x0_cpu.h>
-#include <asm/io.h>
-
-#define S3C2410_NFCONF_EN (1<<15)
-#define S3C2410_NFCONF_512BYTE (1<<14)
-#define S3C2410_NFCONF_4STEP (1<<13)
-#define S3C2410_NFCONF_INITECC (1<<12)
-#define S3C2410_NFCONF_nFCE (1<<11)
-#define S3C2410_NFCONF_TACLS(x) ((x)<<8)
-#define S3C2410_NFCONF_TWRPH0(x) ((x)<<4)
-#define S3C2410_NFCONF_TWRPH1(x) ((x)<<0)
-
-#define S3C2410_ADDR_NALE 4
-#define S3C2410_ADDR_NCLE 8
-
-#ifdef CONFIG_NAND_SPL
-
-/* in the early stage of NAND flash booting, printf() is not available */
-#define printf(fmt, args...)
-
-static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
-{
- int i;
- struct nand_chip *this = mtd_to_nand(mtd);
-
- for (i = 0; i < len; i++)
- buf[i] = readb(this->IO_ADDR_R);
-}
-#endif
-
-static void s3c24x0_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int
ctrl)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
- struct s3c24x0_nand *nand = s3c24x0_get_base_nand();
-
- debug("hwcontrol(): 0x%02x 0x%02x\n", cmd, ctrl);
-
- if (ctrl & NAND_CTRL_CHANGE) {
- ulong IO_ADDR_W = (ulong)nand;
-
- if (!(ctrl & NAND_CLE))
- IO_ADDR_W |= S3C2410_ADDR_NCLE;
- if (!(ctrl & NAND_ALE))
- IO_ADDR_W |= S3C2410_ADDR_NALE;
-
- chip->IO_ADDR_W = (void *)IO_ADDR_W;
-
- if (ctrl & NAND_NCE)
- writel(readl(&nand->nfconf) & ~S3C2410_NFCONF_nFCE,
- &nand->nfconf);
- else
- writel(readl(&nand->nfconf) | S3C2410_NFCONF_nFCE,
- &nand->nfconf);
- }
-
- if (cmd != NAND_CMD_NONE)
- writeb(cmd, chip->IO_ADDR_W);
-}
-
-static int s3c24x0_dev_ready(struct mtd_info *mtd)
-{
- struct s3c24x0_nand *nand = s3c24x0_get_base_nand();
- debug("dev_ready\n");
- return readl(&nand->nfstat) & 0x01;
-}
-
-#ifdef CONFIG_S3C2410_NAND_HWECC
-void s3c24x0_nand_enable_hwecc(struct mtd_info *mtd, int mode)
-{
- struct s3c24x0_nand *nand = s3c24x0_get_base_nand();
- debug("s3c24x0_nand_enable_hwecc(%p, %d)\n", mtd, mode);
- writel(readl(&nand->nfconf) | S3C2410_NFCONF_INITECC,
&nand->nfconf);
-}
-
-static int s3c24x0_nand_calculate_ecc(struct mtd_info *mtd, const u_char
*dat,
- u_char *ecc_code)
-{
- struct s3c24x0_nand *nand = s3c24x0_get_base_nand();
- ecc_code[0] = readb(&nand->nfecc);
- ecc_code[1] = readb(&nand->nfecc + 1);
- ecc_code[2] = readb(&nand->nfecc + 2);
- debug("s3c24x0_nand_calculate_hwecc(%p,): 0x%02x 0x%02x 0x%02x\n",
- mtd , ecc_code[0], ecc_code[1], ecc_code[2]);
-
- return 0;
-}
-
-static int s3c24x0_nand_correct_data(struct mtd_info *mtd, u_char *dat,
- u_char *read_ecc, u_char *calc_ecc)
-{
- if (read_ecc[0] == calc_ecc[0] &&
- read_ecc[1] == calc_ecc[1] &&
- read_ecc[2] == calc_ecc[2])
- return 0;
-
- printf("s3c24x0_nand_correct_data: not implemented\n");
- return -EBADMSG;
-}
-#endif
-
-int board_nand_init(struct nand_chip *nand)
-{
- u_int32_t cfg;
- u_int8_t tacls, twrph0, twrph1;
- struct s3c24x0_clock_power *clk_power =
s3c24x0_get_base_clock_power();
- struct s3c24x0_nand *nand_reg = s3c24x0_get_base_nand();
-
- debug("board_nand_init()\n");
-
- writel(readl(&clk_power->clkcon) | (1 << 4), &clk_power->clkcon);
-
- /* initialize hardware */
-#if defined(CONFIG_S3C24XX_CUSTOM_NAND_TIMING)
- tacls = CONFIG_S3C24XX_TACLS;
- twrph0 = CONFIG_S3C24XX_TWRPH0;
- twrph1 = CONFIG_S3C24XX_TWRPH1;
-#else
- tacls = 4;
- twrph0 = 8;
- twrph1 = 8;
-#endif
-
- cfg = S3C2410_NFCONF_EN;
- cfg |= S3C2410_NFCONF_TACLS(tacls - 1);
- cfg |= S3C2410_NFCONF_TWRPH0(twrph0 - 1);
- cfg |= S3C2410_NFCONF_TWRPH1(twrph1 - 1);
- writel(cfg, &nand_reg->nfconf);
-
- /* initialize nand_chip data structure */
- nand->IO_ADDR_R = (void *)&nand_reg->nfdata;
- nand->IO_ADDR_W = (void *)&nand_reg->nfdata;
-
- nand->select_chip = NULL;
-
- /* read_buf and write_buf are default */
- /* read_byte and write_byte are default */
-#ifdef CONFIG_NAND_SPL
- nand->read_buf = nand_read_buf;
-#endif
-
- /* hwcontrol always must be implemented */
- nand->cmd_ctrl = s3c24x0_hwcontrol;
-
- nand->dev_ready = s3c24x0_dev_ready;
-
-#ifdef CONFIG_S3C2410_NAND_HWECC
- nand->ecc.hwctl = s3c24x0_nand_enable_hwecc;
- nand->ecc.calculate = s3c24x0_nand_calculate_ecc;
- nand->ecc.correct = s3c24x0_nand_correct_data;
- nand->ecc.mode = NAND_ECC_HW;
- nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE;
- nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES;
- nand->ecc.strength = 1;
-#else
- nand->ecc.mode = NAND_ECC_SOFT;
-#endif
-
-#ifdef CONFIG_S3C2410_NAND_BBT
- nand->bbt_options |= NAND_BBT_USE_FLASH;
-#endif
-
- debug("end of nand_init\n");
-
- return 0;
-}
--
2.13.0.303.g4ebf302169-goog
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Acked-by: Minkyu Kang <mk7.k...@samsung.com>
Thanks,
Minkyu Kang
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
