A v7 has been submitted to use last livetree update from Simon Glass
On 05/30/2017 11:03 AM, patrice.chot...@st.com wrote: > From: Patrice Chotard <patrice.chot...@st.com> > > This series adds : > _ update existing sdhci driver to use reset framework > _ add usb phy driver > _ add fastboot support > > With all this feature enable, it's now possible to > _ boot on usb mass storage device > _ boot from kernel image and dtb previously loaded using tftp > _ update mmc partiton using fastboot > > > v6: _ generic ehci/ohci drivers extension has been send separately > _ add reviewed-by Simon Glass > > v5: _ extend generic ehci with phy > _ extend generic ohci with clock, reset and phy > _ remove specifi STi ehci and ohci drivers and use generic ohci/ehci > ones > _ update stih410-b2260 device tree to use ehci and ohci generic > drivers > > v4: _ use PHY uclass currently available on dm-next branch, > update sti ehci, ohci and xhci drivers to use new PHY uclass. > > v3: _ remove reset driver (already applied on u-boot-dm tree by Simon > Glass) > _ patch 4: add new USB PHY uclass requested by Simon Glass > _ patch 5: convert STi usb phy driver to new USB PHY uclass > _ patch 6/7: update echi/ohci drivers to use USB PHY uclass > _ patch 8/9: rework xhci-sti.c and dwc3-sti.c. Previously, xhci-sti > driver binded > dwc3-sti (STi glue driver) which was not correct. Now we respect the > device > tree hierarchy, ie the STi dwc3 glue driver is first probed, then > bind the > xhci-sti driver. > > v2: _ add Reviewed-by: Jaehoon Chung <jh80.ch...@samsung.com> in patches > 2,3 and 4 > _ fix remarks done by Marek Vasut : > _ patch 5 : replace bitfield_replace() by clrsetbits_le32() > _ patch 6 : update error messages and add remove callback > _ patch 8 : put board specific defines in a separate patch > _ patch 7: use setbits_le32() instead of read, modify, write > sequence and add missing parenthesis > _ squash previous patches 7,9,11,12,14,16,17,18,19,20 and 21 > in patch 14 > > > Patrice Chotard (10): > mmc: sti_sdhci: Rework sti_mmc_core_config() > ARM: dts: stih410-family: Add missing reset_names for mmc1 node > mmc: sti_sdhci: Use reset framework > usb: phy: Add STi USB2 PHY > STiH410-B2260: enable USB Host Networking > STiH410-B2260: enable USB, fastboot, reset, PHY related flags > usb: dwc3: Add dwc3 glue driver support for STi > ARM: dts: STiH410: set DWC3 dual role mode to peripheral > ARM: dts: STiH410: update ehci and ohci compatible > board: STiH410-B2260: add fastboot support > > arch/arm/dts/stih407-family.dtsi | 3 +- > arch/arm/dts/stih410.dtsi | 11 +- > arch/arm/include/asm/arch-stih410/sys_proto.h | 11 + > board/st/stih410-b2260/board.c | 41 ++++ > configs/stih410-b2260_defconfig | 39 +++- > doc/device-tree-bindings/phy/phy-stih407-usb.txt | 24 +++ > doc/device-tree-bindings/usb/dwc3-st.txt | 60 ++++++ > drivers/mmc/sti_sdhci.c | 56 +++-- > drivers/phy/Kconfig | 8 + > drivers/phy/Makefile | 1 + > drivers/phy/sti_usb_phy.c | 181 ++++++++++++++++ > drivers/usb/host/Kconfig | 9 + > drivers/usb/host/Makefile | 1 + > drivers/usb/host/dwc3-sti-glue.c | 256 > +++++++++++++++++++++++ > include/configs/stih410-b2260.h | 16 ++ > include/dwc3-sti-glue.h | 43 ++++ > 16 files changed, 730 insertions(+), 30 deletions(-) > create mode 100644 arch/arm/include/asm/arch-stih410/sys_proto.h > create mode 100644 doc/device-tree-bindings/phy/phy-stih407-usb.txt > create mode 100644 doc/device-tree-bindings/usb/dwc3-st.txt > create mode 100644 drivers/phy/sti_usb_phy.c > create mode 100644 drivers/usb/host/dwc3-sti-glue.c > create mode 100644 include/dwc3-sti-glue.h > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
