From: Jagan Teki <ja...@amarulasolutions.com>
Use RFDIV in dm-code instead of numeric value, so-that
it can be common for dm and non-dm.
Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
---
drivers/serial/serial_mxc.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/serial/serial_mxc.c b/drivers/serial/serial_mxc.c
index 6d1d447..65c301d 100644
--- a/drivers/serial/serial_mxc.c
+++ b/drivers/serial/serial_mxc.c
@@ -76,6 +76,7 @@
#define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */
#define UFCR_RFDIV (7<<7) /* Reference freq divider mask */
#define UFCR_RFDIV_SHF 7 /* Reference freq divider shift */
+#define RFDIV 4 /* divide input clock by 2 */
#define UFCR_DCEDTE (1<<6) /* DTE mode select */
#define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */
#define USR1_PARITYERR (1<<15) /* Parity error interrupt flag */
@@ -106,7 +107,7 @@
#define UTS_RXEMPTY (1<<5) /* RxFIFO empty */
#define UTS_TXFULL (1<<4) /* TxFIFO full */
#define UTS_RXFULL (1<<3) /* RxFIFO full */
-#define UTS_SOFTRST (1<<0) /* Software reset */
+#define UTS_SOFTRS (1<<0) /* Software reset */
DECLARE_GLOBAL_DATA_PTR;
@@ -146,7 +147,6 @@ struct mxc_uart {
#define TXTL 2 /* reset default */
#define RXTL 1 /* reset default */
-#define RFDIV 4 /* divide input clock by 2 */
static void mxc_serial_setbrg(void)
{
@@ -255,7 +255,7 @@ int mxc_serial_setbrg(struct udevice *dev, int baudrate)
u32 clk = imx_get_uartclk();
u32 tmp;
- tmp = 4 << UFCR_RFDIV_SHF;
+ tmp = RFDIV << UFCR_RFDIV_SHF;
if (plat->use_dte)
tmp |= UFCR_DCEDTE;
writel(tmp, &uart->fcr);
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
