Hi, On Fri, Jun 09, 2017 at 09:24:19PM +0800, Ziping Chen wrote: > From: Ziping Chen <techping.c...@gmail.com> > > The SinA83T is an A83T core/daughter board combo from Sinlinx. > > Add support for it. > > Signed-off-by: Ziping Chen <techping.c...@gmail.com> > --- > arch/arm/dts/Makefile | 3 +- > arch/arm/dts/sun8i-a83t-sinlinx-sina83t.dts | 107 > ++++++++++++++++++++++++++++ > board/sunxi/MAINTAINERS | 6 ++ > configs/Sinlinx_SinA83T_defconfig | 21 ++++++ > 4 files changed, 136 insertions(+), 1 deletion(-) > create mode 100644 arch/arm/dts/sun8i-a83t-sinlinx-sina83t.dts > create mode 100644 configs/Sinlinx_SinA83T_defconfig > > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile > index 8b8f5e9e76..c0eae9f443 100644 > --- a/arch/arm/dts/Makefile > +++ b/arch/arm/dts/Makefile > @@ -305,7 +305,8 @@ dtb-$(CONFIG_MACH_SUN8I_A33) += \ > dtb-$(CONFIG_MACH_SUN8I_A83T) += \ > sun8i-a83t-allwinner-h8homlet-v2.dtb \ > sun8i-a83t-cubietruck-plus.dtb \ > - sun8i-a83t-sinovoip-bpi-m3.dtb > + sun8i-a83t-sinovoip-bpi-m3.dtb \ > + sun8i-a83t-sinlinx-sina83t.dtb
DT should be ordered alphabetically, so before the BPi M3. > dtb-$(CONFIG_MACH_SUN8I_H3) += \ > sun8i-h2-plus-orangepi-zero.dtb \ > sun8i-h3-bananapi-m2-plus.dtb \ > diff --git a/arch/arm/dts/sun8i-a83t-sinlinx-sina83t.dts > b/arch/arm/dts/sun8i-a83t-sinlinx-sina83t.dts > new file mode 100644 > index 0000000000..ae50e022d4 > --- /dev/null > +++ b/arch/arm/dts/sun8i-a83t-sinlinx-sina83t.dts > @@ -0,0 +1,107 @@ > +/* > + * Copyright 2017 Ziping Chen > + * Ziping Chen <techping.c...@gmail.com> > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This file is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of the > + * License, or (at your option) any later version. > + * > + * This file is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * Or, alternatively, > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use, > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. > + */ > + > +/dts-v1/; > +#include "sun8i-a83t.dtsi" > +#include "sunxi-common-regulators.dtsi" > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/input/input.h> > +#include <dt-bindings/pinctrl/sun4i-a10.h> > + > +/ { > + model = "Sinlinx SinA83T"; > + compatible = "sinlinx,sina83t", "allwinner,sun8i-a83t"; > + > + aliases { > + serial0 = &uart0; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + leds { > + compatible = "gpio-leds"; > + > + usr_led { > + label = "sinlinx:blue:usr"; > + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ > + default-state = "on"; > + }; > + }; > +}; > + > +#define USB_CLASS_HUB 9 > + > +&ehci0 { > + /* USB 2.0 4 port hub IC */ > + status = "okay"; > + #address-cells = <2>; > + #size-cells = <2>; > + > + hub { > + compatible = "usb-hub"; > + usb,device-class = <USB_CLASS_HUB>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > +}; > + > +&ehci1 { > + status = "okay"; > +}; > + > +&ohci0 { > + status = "okay"; > +}; > + > +&uart0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart0_pins_a>; > + status = "okay"; > +}; > + > +&usb_otg { > + status = "okay"; > +}; Can you contribute that DT with Linux first? We share them with Linux, and it should be accepted there first. Thanks! Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com
signature.asc
Description: PGP signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot