> Davinci: add a pin multiplexer configuration API. > > Creates a method allowing pin settings to be logically grouped into data > structure arrays and provides an API to configure the pinmux settings to > enable the relevant pin functions. > > Signed-off-by: Nick Thompson <nick.thomp...@gefanuc.com> > --- > Applies to: u-boot-ti > > Changes from last patch: > Make example match current usage (in DA8xx code, to follow) > Error check all pin settings before applying any changes > Type correction > > The number of mux fields per register and the width of the fields needs to > be set per SoC. The initial settings are appropriate for at least DA8xx > devices. These should be modified in misc.h to support other devices as > required. > > board/davinci/common/misc.c | 48 > ++++++++++++++++++++++++++++++++++++++++++- > board/davinci/common/misc.h | 12 ++++++++++ > 2 files changed, 59 insertions(+), 1 deletions(-) > > diff --git a/board/davinci/common/misc.c b/board/davinci/common/misc.c > index ffdc20b..9fab76f 100644 > --- a/board/davinci/common/misc.c > +++ b/board/davinci/common/misc.c > @@ -1,6 +1,7 @@
Pushed to u-boot-ti/master Minor mod to patch header http://git.denx.de/?p=u-boot/u-boot-ti.git;a=commit;h=5ff9f0f6bf1110785c12511770d6d224d1983592 Thanks, Sandeep _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot