Enable validation of boot.scr script prior to its execution dependent on "secureboot" flag in environment. Also enable "secureboot=y" flag in environment for ARM based platforms instead of bootcmd.
Signed-off-by: Vinitha Pillai <vinitha.pil...@nxp.com> Signed-off-by: Sumit Garg <sumit.g...@nxp.com> --- This patch depends on the following patch: https://patchwork.ozlabs.org/patch/771211/ include/configs/ls2080ardb.h | 107 +++++++++++++++++++------------------------ 1 file changed, 46 insertions(+), 61 deletions(-) diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index 5fb889f..20757af 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -365,77 +365,37 @@ unsigned long get_board_sys_clk(void); #ifdef CONFIG_QSPI_BOOT #define MC_INIT_CMD \ - "mcinitcmd=sf probe 0:0;" \ - "sf read 0x20a00000 0xA00000 0x100000;" \ - "sf read 0x20e00000 0xE00000 0x100000;" \ + "mcinitcmd=env exists secureboot && " \ + "esbc_validate 0x20700000 && " \ + "esbc_validate 0x20740000;" \ "fsl_mc start mc 0x20a00000 0x20e00000 \0" #else #define MC_INIT_CMD \ - "mcinitcmd=fsl_mc start mc 0x580a00000" \ - " 0x580e00000 \0" + "mcinitcmd=env exists secureboot && " \ + "esbc_validate 0x580700000 && " \ + "esbc_validate 0x580740000; " \ + "fsl_mc start mc 0x580a00000 0x580e00000 \0" #endif /* Initial environment variables */ #undef CONFIG_EXTRA_ENV_SETTINGS -#ifdef CONFIG_SECURE_BOOT -#ifdef CONFIG_QSPI_BOOT -#define CONFIG_EXTRA_ENV_SETTINGS \ - "hwconfig=fsl_ddr:bank_intlv=auto\0" \ - "scriptaddr=0x80800000\0" \ - "kernel_addr_r=0x81000000\0" \ - "pxefile_addr_r=0x81000000\0" \ - "fdt_addr_r=0x88000000\0" \ - "ramdisk_addr_r=0x89000000\0" \ - "loadaddr=0x80100000\0" \ - "kernel_addr=0x100000\0" \ - "ramdisk_size=0x2000000\0" \ - "fdt_high=0xa0000000\0" \ - "initrd_high=0xffffffffffffffff\0" \ - "kernel_start=0x21000000\0" \ - "mcmemsize=0x40000000\0" \ - "mcinitcmd=esbc_validate 0x20700000;" \ - "esbc_validate 0x20740000;" \ - "fsl_mc start mc 0x20a00000" \ - " 0x20e00000 \0" \ - BOOTENV -#else /* !(CONFIG_QSPI_BOOT) */ #define CONFIG_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:bank_intlv=auto\0" \ - "scriptaddr=0x80800000\0" \ - "kernel_addr_r=0x81000000\0" \ - "pxefile_addr_r=0x81000000\0" \ - "fdt_addr_r=0x88000000\0" \ - "ramdisk_addr_r=0x89000000\0" \ - "loadaddr=0x80100000\0" \ - "kernel_addr=0x100000\0" \ - "ramdisk_addr=0x800000\0" \ - "ramdisk_size=0x2000000\0" \ - "fdt_high=0xa0000000\0" \ - "initrd_high=0xffffffffffffffff\0" \ - "kernel_start=0x581000000\0" \ - "kernel_load=0xa0000000\0" \ - "kernel_size=0x2800000\0" \ - "mcmemsize=0x40000000\0" \ - "fdtfile=fsl-ls2080a-rdb.dtb\0" \ - "mcinitcmd=esbc_validate 0x580700000;" \ - "esbc_validate 0x580740000;" \ - "fsl_mc start mc 0x580a00000" \ - " 0x580e00000 \0" \ - BOOTENV -#endif -#else /* !(CONFIG_SECURE_BOOT) */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "hwconfig=fsl_ddr:bank_intlv=auto\0" \ "ramdisk_addr=0x800000\0" \ "ramdisk_size=0x2000000\0" \ "fdt_high=0xa0000000\0" \ "initrd_high=0xffffffffffffffff\0" \ "fdt_addr=0x64f00000\0" \ "kernel_addr=0x581000000\0" \ + "kernel_start=0x1000000\0" \ + "kernelheader_start=0x800000\0" \ "scriptaddr=0x80000000\0" \ + "scripthdraddr=0x80080000\0" \ "fdtheader_addr_r=0x80100000\0" \ "kernelheader_addr_r=0x80200000\0" \ + "kernelheader_addr=0x580800000\0" \ "kernel_addr_r=0x81000000\0" \ + "kernelheader_size=0x40000\0" \ "fdt_addr_r=0x90000000\0" \ "load_addr=0xa0000000\0" \ "kernel_size=0x2800000\0" \ @@ -443,6 +403,7 @@ unsigned long get_board_sys_clk(void); MC_INIT_CMD \ BOOTENV \ "boot_scripts=ls2088ardb_boot.scr\0" \ + "boot_script_hdr=hdr_ls2088ardb_bs.out\0" \ "scan_dev_for_boot_part=" \ "part list ${devtype} ${devnum} devplist; " \ "env exists devplist || setenv devplist 1; " \ @@ -453,31 +414,55 @@ unsigned long get_board_sys_clk(void); "run scan_dev_for_boot; " \ "fi; " \ "done\0" \ + "scan_dev_for_boot=" \ + "echo Scanning ${devtype} " \ + "${devnum}:${distro_bootpart}...; " \ + "for prefix in ${boot_prefixes}; do " \ + "run scan_dev_for_scripts; " \ + "done;" \ + "\0" \ + "boot_a_script=" \ + "load ${devtype} ${devnum}:${distro_bootpart} " \ + "${scriptaddr} ${prefix}${script}; " \ + "env exists secureboot && load ${devtype} " \ + "${devnum}:${distro_bootpart} " \ + "${scripthdraddr} ${prefix}${boot_script_hdr} " \ + "&& esbc_validate ${scripthdraddr};" \ + "source ${scriptaddr}\0" \ "installer=load scsi 0:2 $load_addr " \ "/flex_installer_arm64.itb; " \ "bootm $load_addr#ls2088ardb\0" \ "qspi_bootcmd=echo Trying load from qspi..;" \ "sf probe && sf read $load_addr " \ - "$kernel_addr $kernel_size &&" \ + "$kernel_start $kernel_size ; env exists secureboot " \ + "&& sf read $kernelheader_addr_r $kernelheader_start " \ + "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \ " bootm $load_addr#$board\0"\ "nor_bootcmd=echo Trying load from nor..;" \ "cp.b $kernel_addr $load_addr " \ - "$kernel_size && bootm $load_addr#$board\0" -#endif + "$kernel_size ; env exists secureboot && " \ + "cp.b $kernelheader_addr $kernelheader_addr_r " \ + "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \ + "bootm $load_addr#$board\0" #undef CONFIG_BOOTCOMMAND #ifdef CONFIG_QSPI_BOOT /* Try to boot an on-QSPI kernel first, then do normal distro boot */ #define CONFIG_BOOTCOMMAND \ - "env exists mcinitcmd && run mcinitcmd && " \ - "fsl_mc lazyapply dpl 0x20d00000;" \ - "run distro_bootcmd;run qspi_bootcmd" + "env exists mcinitcmd && env exists secureboot " \ + "&& esbc_validate 0x20780000; " \ + "env exists mcinitcmd && " \ + "fsl_mc lazyapply dpl 0x20d00000; " \ + "run distro_bootcmd;run qspi_bootcmd; " \ + "env exists secureboot && esbc_halt; " #else /* Try to boot an on-NOR kernel first, then do normal distro boot */ #define CONFIG_BOOTCOMMAND \ - "env exists mcinitcmd && run mcinitcmd && " \ - "fsl_mc lazyapply dpl 0x580d00000;" \ - "run distro_bootcmd;run nor_bootcmd" + "env exists mcinitcmd && env exists secureboot " \ + "&& esbc_validate 0x580780000; env exists mcinitcmd " \ + "&& fsl_mc lazyapply dpl 0x580d00000;" \ + "run distro_bootcmd;run nor_bootcmd; " \ + "env exists secureboot && esbc_halt; " #endif #undef CONFIG_BOOTARGS -- 1.9.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
