Paulraj, Sandeep wrote: >>>> Introduce Micron DDR timings and provide >>>> CONFIG_OMAP3_INFINEON_DDR and CONFIG_OMAP3_MICRON_DDR config >>>> options to allow for platform files to setup their timings as >>>> per the type of DDR selected >>>> >>>> Reported-by: Steve Sakoman in >>>> >> http://www.nabble.com/forum/Permalink.jtp?root=25779518&post=25959734&page >>>> =y >>>> >>>> Signed-off-by: Nishanth Menon <n...@ti.com> >>>> --- >>>> include/asm-arm/arch-omap3/mem.h | 88 >> ++++++++++++++++++++++++++++++--- >>>> ----- >>>> include/configs/devkit8000.h | 3 + >>>> include/configs/omap3_beagle.h | 3 + >>>> include/configs/omap3_evm.h | 3 + >>>> include/configs/omap3_overo.h | 3 + >>>> include/configs/omap3_pandora.h | 3 + >>>> include/configs/omap3_sdp3430.h | 3 + >>>> include/configs/omap3_zoom1.h | 3 + >>>> include/configs/omap3_zoom2.h | 3 + >>>> 9 files changed, 94 insertions(+), 18 deletions(-) >>>> >>> Pushed to u-boot-ti/next >>> >>> I think this series from Nishanth needs some runtime tests. >>> I believe Steve had some issues with his EVM not booting everytime due >> to issues with DDR init. >>> Thanks, >>> Sandeep >> Maybe it should go on the testing branch? >> >> I will give zoom2 a try.. >> >> Tom >> > > Tom, Dirk, Steve, > > Did u get a chance to try? > > I am seeing a lot of OMAP3 patches which seem to be touching the above > mentioned headers files. > > Thanks, > Sandeep > > > For zoom2. I warm booted the kernel with ti/next. So it looks ok for zoom2 Tom
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
