Add support of usb host and gadget function for rk3328. Changes in v5: - Propagate return value and print error message when failed
Changes in v4: - Splite patch [U-boot,v3,04/10] into two patches - Define set vbus as empty function if the macros aren't set - Prepare a mask and set capabilities in GUSBCFG register once Changes in v3: - Revert change of macro definition in dwc2 driver - Support host mode without HNP/SRP capability through DTS Changes in v2: - Add commit messages - Split patch [U-boot,7/8] into two patches - Use fixed regulator to control vbus instead of gpio Meng Dongyang (11): rockchip: configs: rk3328: support ehci and ohci controller rockchip: dts: rk3328: add ehci and ohci node and enable host0 port rockchip: configs: rk3328: config xhci controller usb: host: xhci-rockchip: use fixed regulator to control vbus usb: host: xhci-rockchip: add support for rk3328 rockchip: dts: rk3328: support and enable xhci rockchip: configs: rk3328: enable dwc2 driver and config fastboot usb: dwc2: force to host mode if not support HNP/SRP rockchip: rk3328: board: add support of dwc2 gadget rockchip: dts: rk3328: support and enable dwc2 rockchip: dts: rk3399: control vbus of typec by fixed regulator arch/arm/dts/rk3328-evb.dts | 36 +++++++++++++++++++++ arch/arm/dts/rk3328.dtsi | 35 +++++++++++++++++++++ arch/arm/dts/rk3399-evb.dts | 16 ++++++++-- board/rockchip/evb_rk3328/evb-rk3328.c | 43 +++++++++++++++++++++++-- configs/evb-rk3328_defconfig | 25 +++++++++++++++ drivers/usb/host/dwc2.c | 19 ++++++++++-- drivers/usb/host/xhci-rockchip.c | 57 ++++++++++++++++++++++++++-------- include/configs/rk3328_common.h | 9 ++++++ 8 files changed, 219 insertions(+), 21 deletions(-) -- 1.9.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
