Hi Tom, > -----Original Message----- > From: Tom Rini [mailto:tr...@konsulko.com] > Sent: Saturday, June 10, 2017 6:46 AM > To: Vikas MANOCHA <vikas.mano...@st.com> > Cc: u-boot@lists.denx.de; Christophe KERELLO <christophe.kere...@st.com>; > Alexandre TORGUE <alexandre.tor...@st.com>; > Christophe PRIOUZEAU <christophe.priouz...@st.com> > Subject: Re: [U-Boot,v2,3/7] stm32: stm32f7: add spl build support > > On Sun, May 28, 2017 at 12:55:10PM -0700, Vikas Manocha wrote: > > > This commit supports booting from stm32 internal nor flash. spl U-Boot > > initializes the sdram memory, copies next image (e.g. standard U-Boot) > > to sdram & then jumps to entry point. > > > > Here are the flash memory addresses for U-Boot-spl & standard U-Boot: > > - spl U-Boot : 0x0800_0000 > > - standard U-Boot : 0x0800_8000 > > > > To compile u-boot without spl: Remove SUPPORT_SPL configuration > > (arch/arm/mach-stm32/Kconfig) > > > > Signed-off-by: Vikas Manocha <vikas.mano...@st.com> > > I had to rework the Kconfig locations here slightly (and in follow-up > patches) to have the main select's be under STM32F7 in > arch/arm/mach-stm32/Kconfig as it's not right to introduce a second 'config > SUPPORT_SPL\nselect ...' stanza inside of arch/arm/mach-stm32/stm32f7/Kconfig.
Thanks for the kconfig rework, appreciate it. Cheers, Vikas > > Reviewed-by: Tom Rini <tr...@konsulko.com> > > -- > Tom _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
