Hi,

Any feedback or comments on this...?

Thanks
Mahavir


On Mon, 2009-11-02 at 22:52 -0800, Mahavir Jain wrote:
> This patch implements write support to usb device with raw partition.
> It will be useful for filesystem write support to usb device from
> u-boot in future.
> 
> Tested with writing kernel image to raw usb disk & booting with usb
> read command into ram.
> 
> [Note:  run usb part to get info about start sector & number of
> sectors on a partition for usb write operation.]
> 
> Signed-off-by: Mahavir Jain <mj...@marvell.com>
> ---
>  common/cmd_usb.c     |   24 ++++++++++++
>  common/usb_storage.c |   99 
> ++++++++++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 123 insertions(+), 0 deletions(-)
> 
> diff --git a/common/cmd_usb.c b/common/cmd_usb.c
> index 7b8ee6b..1acb6fc 100644
> --- a/common/cmd_usb.c
> +++ b/common/cmd_usb.c
> @@ -642,6 +642,28 @@ int do_usb(cmd_tbl_t *cmdtp, int flag, int argc, char 
> *argv[])
>                       return 1;
>               }
>       }
> +     if (strcmp(argv[1], "write") == 0) {
> +             if (usb_stor_curr_dev < 0) {
> +                     printf("no current device selected\n");
> +                     return 1;
> +             }
> +             if (argc == 5) {
> +                     unsigned long addr = simple_strtoul(argv[2], NULL, 16);
> +                     unsigned long blk  = simple_strtoul(argv[3], NULL, 16);
> +                     unsigned long cnt  = simple_strtoul(argv[4], NULL, 16);
> +                     unsigned long n;
> +                     printf("\nUSB write: device %d block # %ld, count %ld"
> +                             " ... ", usb_stor_curr_dev, blk, cnt);
> +                     stor_dev = usb_stor_get_dev(usb_stor_curr_dev);
> +                     n = stor_dev->block_write(usb_stor_curr_dev, blk, cnt,
> +                                             (ulong *)addr);
> +                     printf("%ld blocks write: %s\n", n,
> +                             (n == cnt) ? "OK" : "ERROR");
> +                     if (n == cnt)
> +                             return 0;
> +                     return 1;
> +             }
> +     }
>       if (strncmp(argv[1], "dev", 3) == 0) {
>               if (argc == 3) {
>                       int dev = (int)simple_strtoul(argv[2], NULL, 10);
> @@ -687,6 +709,8 @@ U_BOOT_CMD(
>       " devices\n"
>       "usb read addr blk# cnt - read `cnt' blocks starting at block `blk#'\n"
>       "    to memory address `addr'"
> +     "usb write addr blk# cnt - write `cnt' blocks starting at block 
> `blk#'\n"
> +     "    from memory address `addr'"
>  );
>  
> 
> diff --git a/common/usb_storage.c b/common/usb_storage.c
> index 19613f2..ed5b3f3 100644
> --- a/common/usb_storage.c
> +++ b/common/usb_storage.c
> @@ -168,6 +168,8 @@ int usb_storage_probe(struct usb_device *dev, unsigned 
> int ifnum,
>                     struct us_data *ss);
>  unsigned long usb_stor_read(int device, unsigned long blknr,
>                           unsigned long blkcnt, void *buffer);
> +unsigned long usb_stor_write(int device, unsigned long blknr,
> +                          unsigned long blkcnt, const void *buffer);
>  struct usb_device * usb_get_dev_index(int index);
>  void uhci_show_temp_int_td(void);
>  
> @@ -227,6 +229,7 @@ int usb_stor_scan(int mode)
>               usb_dev_desc[i].dev = i;
>               usb_dev_desc[i].part_type = PART_TYPE_UNKNOWN;
>               usb_dev_desc[i].block_read = usb_stor_read;
> +             usb_dev_desc[i].block_write = usb_stor_write;
>       }
>  
>       usb_max_devs = 0;
> @@ -964,6 +967,22 @@ static int usb_read_10(ccb *srb, struct us_data *ss, 
> unsigned long start,
>       return ss->transport(srb, ss);
>  }
>  
> +static int usb_write_10(ccb *srb, struct us_data *ss, unsigned long start,
> +                     unsigned short blocks)
> +{
> +     memset(&srb->cmd[0], 0, 12);
> +     srb->cmd[0] = SCSI_WRITE10;
> +     srb->cmd[2] = ((unsigned char) (start >> 24)) & 0xff;
> +     srb->cmd[3] = ((unsigned char) (start >> 16)) & 0xff;
> +     srb->cmd[4] = ((unsigned char) (start >> 8)) & 0xff;
> +     srb->cmd[5] = ((unsigned char) (start)) & 0xff;
> +     srb->cmd[7] = ((unsigned char) (blocks >> 8)) & 0xff;
> +     srb->cmd[8] = (unsigned char) blocks & 0xff;
> +     srb->cmdlen = 12;
> +     USB_STOR_PRINTF("write10: start %lx blocks %x\n", start, blocks);
> +     return ss->transport(srb, ss);
> +}
> +
>  
>  #ifdef CONFIG_USB_BIN_FIXUP
>  /*
> @@ -1065,6 +1084,86 @@ retry_it:
>       return blkcnt;
>  }
>  
> +#define USB_MAX_WRITE_BLK 20
> +
> +unsigned long usb_stor_write(int device, unsigned long blknr,
> +                             unsigned long blkcnt, const void *buffer)
> +{
> +     unsigned long start, blks, buf_addr;
> +     unsigned short smallblks;
> +     struct usb_device *dev;
> +     int retry, i;
> +     ccb *srb = &usb_ccb;
> +
> +     if (blkcnt == 0)
> +             return 0;
> +
> +     device &= 0xff;
> +     /* Setup  device */
> +     USB_STOR_PRINTF("\nusb_write: dev %d \n", device);
> +     dev = NULL;
> +     for (i = 0; i < USB_MAX_DEVICE; i++) {
> +             dev = usb_get_dev_index(i);
> +             if (dev == NULL)
> +                     return 0;
> +             if (dev->devnum == usb_dev_desc[device].target)
> +                     break;
> +     }
> +
> +     usb_disable_asynch(1); /* asynch transfer not allowed */
> +
> +     srb->lun = usb_dev_desc[device].lun;
> +     buf_addr = (unsigned long)buffer;
> +     start = blknr;
> +     blks = blkcnt;
> +     if (usb_test_unit_ready(srb, (struct us_data *)dev->privptr)) {
> +             printf("Device NOT ready\n   Request Sense returned %02X %02X"
> +                    " %02X\n", srb->sense_buf[2], srb->sense_buf[12],
> +                     srb->sense_buf[13]);
> +             return 0;
> +     }
> +
> +     USB_STOR_PRINTF("\nusb_write: dev %d startblk %lx, blccnt %lx"
> +                     " buffer %lx\n", device, start, blks, buf_addr);
> +
> +     do {
> +             /* If write fails retry for max retry count else
> +              * return with number of blocks written successfully.
> +              */
> +             retry = 2;
> +             srb->pdata = (unsigned char *)buf_addr;
> +             if (blks > USB_MAX_WRITE_BLK)
> +                     smallblks = USB_MAX_WRITE_BLK;
> +             else
> +                     smallblks = (unsigned short) blks;
> +retry_it:
> +             if (smallblks == USB_MAX_WRITE_BLK)
> +                     usb_show_progress();
> +             srb->datalen = usb_dev_desc[device].blksz * smallblks;
> +             srb->pdata = (unsigned char *)buf_addr;
> +             if (usb_write_10(srb, (struct us_data *)dev->privptr, start,
> +                 smallblks)) {
> +                     USB_STOR_PRINTF("Write ERROR\n");
> +                     usb_request_sense(srb, (struct us_data *)dev->privptr);
> +                     if (retry--)
> +                             goto retry_it;
> +                     blkcnt -= blks;
> +                     break;
> +             }
> +             start += smallblks;
> +             blks -= smallblks;
> +             buf_addr += srb->datalen;
> +     } while (blks != 0);
> +
> +     USB_STOR_PRINTF("usb_write: end startblk %lx, blccnt %x buffer %lx\n",
> +                     start, smallblks, buf_addr);
> +
> +     usb_disable_asynch(0); /* asynch transfer allowed */
> +     if (blkcnt >= USB_MAX_WRITE_BLK)
> +             printf("\n");
> +     return blkcnt;
> +
> +}
>  
>  /* Probe to see if a new device is actually a Storage device */
>  int usb_storage_probe(struct usb_device *dev, unsigned int ifnum,

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to