xHC reports supported maximum number of ports in the HCSPARAMS1
register, so it's unnecessary to use a hardcoded config option
CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS.
Signed-off-by: Bin Meng <bmeng...@gmail.com>
---
drivers/usb/host/xhci.c | 8 +++++---
drivers/usb/host/xhci.h | 4 +---
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 2acb0e6..8631e27 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -668,12 +668,14 @@ static int xhci_submit_root(struct usb_device *udev,
unsigned long pipe,
uint32_t reg;
volatile uint32_t *status_reg;
struct xhci_ctrl *ctrl = xhci_get_ctrl(udev);
+ struct xhci_hccr *hccr = ctrl->hccr;
struct xhci_hcor *hcor = ctrl->hcor;
+ int max_ports = HCS_MAX_PORTS(xhci_readl(&hccr->cr_hcsparams1));
if ((req->requesttype & USB_RT_PORT) &&
- le16_to_cpu(req->index) > CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS) {
- printf("The request port(%d) is not configured\n",
- le16_to_cpu(req->index) - 1);
+ le16_to_cpu(req->index) > max_ports) {
+ printf("The request port(%d) exceeds maximum port number\n",
+ le16_to_cpu(req->index) - 1);
return -EINVAL;
}
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 3cf08e4..b9602ba 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -172,9 +172,7 @@ struct xhci_hcor {
volatile uint64_t or_dcbaap;
volatile uint32_t or_config;
volatile uint32_t reserved_2[241];
- struct xhci_hcor_port_regs portregs[CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS];
-
- uint32_t reserved_4[CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS * 254];
+ struct xhci_hcor_port_regs portregs[MAX_HC_PORTS];
};
/* USBCMD - USB command - command bitmasks */
--
2.9.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
