This change sets the VLDO4 settings output to 2.8V in PMIC initialization. I accidentally noticed this when I was testing the DSI voltage input which was 3.3V. Not setting the proper voltage can harm some of the voltage sensitive peripheral.
Gautam Bhat (1): Set VLD04 output to 2.8V in PMIC initialization. board/freescale/mx7dsabresd/mx7dsabresd.c | 10 ++++++++++ 1 file changed, 10 insertions(+) -- 2.11.0 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
