Currently, selecting state simple is done by the device driver model,
prior probing the driver. The problem is that it's done and called on
the pinctrl node with "gmac" as the "periph" struct udevice *. So
pinctrl-rk3288 is looking for an interrupt property that is not found,
and then gmac_config is never called.
This commits toggles the pinctrl on the right node from the probe
function of the driver.
Signed-off-by: Romain Perier <romain.per...@collabora.com>
---
drivers/net/gmac_rockchip.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/gmac_rockchip.c b/drivers/net/gmac_rockchip.c
index 5e2ca76302..8581026b4a 100644
--- a/drivers/net/gmac_rockchip.c
+++ b/drivers/net/gmac_rockchip.c
@@ -160,6 +160,10 @@ static int gmac_rockchip_probe(struct udevice *dev)
struct clk clk;
int ret;
+ ret = pinctrl_select_state(dev, "simple");
+ if (ret)
+ return ret;
+
ret = clk_get_by_index(dev, 0, &clk);
if (ret)
return ret;
--
2.11.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
