[U-Boot] [PATCH v2 11/15] dm: sunxi: Linksprite_pcDuino3: Correct polarity of MMC card detect

[Simon Glass]

This is shown as active high in the schematics[1], so fix it.

[1] https://patchwork.ozlabs.org/patch/777890/

Signed-off-by: Simon Glass <s...@chromium.org>
Reported-by: Maxime Ripard <maxime.rip...@free-electrons.com>
---

Changes in v2:
- Add new patch to correct polarity of MMC card detect on Linksprite_pcDuino3

 arch/arm/dts/sun7i-a20-pcduino3.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/dts/sun7i-a20-pcduino3.dts 
b/arch/arm/dts/sun7i-a20-pcduino3.dts
index 1a8b39be1d..37b1e0ee9b 100644
--- a/arch/arm/dts/sun7i-a20-pcduino3.dts
+++ b/arch/arm/dts/sun7i-a20-pcduino3.dts
@@ -164,7 +164,7 @@
        pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
-       cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+       cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
        cd-inverted;
        status = "okay";
 };
-- 
2.13.2.725.g09c95d1e9-goog

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot