From: Patrice Chotard <patrice.chot...@st.com>

Add support of generic PHY framework support

Signed-off-by: Patrice Chotard <patrice.chot...@st.com>
Reviewed-by: Marek Vasut <ma...@denx.de>
Reviewed-by: Simon Glass <s...@chromium.org>
---

v5:     _ none
v4:     _ none
v3:     _ use generic_phy_valid() method
v2:     _ none


 drivers/usb/host/xhci-dwc3.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/drivers/usb/host/xhci-dwc3.c b/drivers/usb/host/xhci-dwc3.c
index 7c32722..3c46378 100644
--- a/drivers/usb/host/xhci-dwc3.c
+++ b/drivers/usb/host/xhci-dwc3.c
@@ -10,6 +10,8 @@
 
 #include <common.h>
 #include <dm.h>
+#include <fdtdec.h>
+#include <generic-phy.h>
 #include <usb.h>
 
 #include "xhci.h"
@@ -19,6 +21,10 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+struct xhci_dwc3_platdata {
+       struct phy usb_phy;
+};
+
 struct xhci_dwc3_priv {
        struct xhci_ctrl ctrl;
 };
@@ -116,11 +122,26 @@ static int xhci_dwc3_probe(struct udevice *dev)
        struct xhci_hccr *hccr;
        struct dwc3 *dwc3_reg;
        enum usb_dr_mode dr_mode;
+       int ret;
 
        hccr = (struct xhci_hccr *)devfdt_get_addr(dev);
        hcor = (struct xhci_hcor *)((phys_addr_t)hccr +
                        HC_LENGTH(xhci_readl(&(hccr)->cr_capbase)));
 
+       ret = generic_phy_get_by_index(dev, 0, &plat->usb_phy);
+       if (ret) {
+               if (ret != -ENOENT) {
+                       error("Failed to get USB PHY for %s\n", dev->name);
+                       return ret;
+               }
+       } else {
+               ret = generic_phy_init(&plat->usb_phy);
+               if (ret) {
+                       error("Can't init USB PHY for %s\n", dev->name);
+                       return ret;
+               }
+       }
+
        dwc3_reg = (struct dwc3 *)((char *)(hccr) + DWC3_REG_OFFSET);
 
        dwc3_core_init(dwc3_reg);
@@ -137,6 +158,17 @@ static int xhci_dwc3_probe(struct udevice *dev)
 
 static int xhci_dwc3_remove(struct udevice *dev)
 {
+       struct xhci_dwc3_platdata *plat = dev_get_platdata(dev);
+       int ret;
+
+       if (generic_phy_valid(&plat->usb_phy)) {
+               ret = generic_phy_exit(&plat->usb_phy);
+               if (ret) {
+                       error("Can't deinit USB PHY for %s\n", dev->name);
+                       return ret;
+               }
+       }
+
        return xhci_deregister(dev);
 }
 
-- 
1.9.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to