I tried adding the dm-pre-reloc line to every node and sub-node, but it doesn’t help.
On 06/07/2017, 8:26 PM, "Lothar Waßmann" <l...@karo-electronics.de> wrote: >Hi, > >On Thu, 6 Jul 2017 10:32:57 +0000 Gan, Yau Wai wrote: >> U-boot for Nios II on the 10m50 dev board is not functioning. The serial >> terminal prints nothing upon booting up. The u-boot image is loaded via >> GDB/JTAG to the FPGA on-chip RAM. >> >> Bisect activities were carried and discovered that the change from using >> dm_scan_fdt_node to dm_scan_fdt_dev in the simple_bus.c. This leads to >> suspecting the 10m50_devboard.dts need update to include >> "u-boot,dm-pre-reloc". >> >u-boot,dm-pre-reloc has to be present in each item of the DT path >leading to the node where you need it. > > >Lothar Waßmann _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot