Hi Joe,
On 21.06.2017 10:31, stef...@malvell.com wrote:
From: Stefan Chulski <stef...@marvell.com>
Issues were found during internal QA phase.
Stefan Chulski (10):
net: mvpp2x: Add GPIO configuration support
net: mvpp2x: fix phy connected to wrong mdio issue
net: mvpp2x: Enable GoP packet padding in TX
net: mvpp2x: fix BM configuration overrun issue
net: mvpp2x: decrease size of AGGR_TXQ and CPU_DESC_CHUNK
net: mvpp2x: remove MBUS configurations from MvPP22 driver
net: mvpp2x: Remove IRQ configuration from u-boot
net: mvpp2x: Set BM pool high address
net: mvpp2x: remove TX drain from transmit routine
net: mvpp2x: Set BM poll size once during priv probe
drivers/net/mvpp2.c | 189 ++++++++++++++++++++++++++--------------------------
1 file changed, 94 insertions(+), 95 deletions(-)
Joe, do you have any comments on these mvpp2 patches?
Thanks,
Stefan
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
