Hi Eric, On Tue, Nov 1, 2016 at 5:13 PM, Eric Nelson <e...@nelint.com> wrote: > This is a virtual "board" that uses configuration files and > Kconfig to define the memory layout used by a real board during > the board bring-up process. > > It generates an SPL image that can be loaded using imx_usb or > SB_LOADER.exe. > > When run, it will generate a set of calibration constants for > use in either or both a DCD configuration file for boards that > use u-boot.imx or struct mx6_mmdc_calibration for boards that > boot via SPL. > > In essence, it is a configurable, open-source variant of the > Freescale ddr-stress tool. > > https://community.nxp.com/docs/DOC-105652 > > File mx6memcal_defconfig configures the board for use with > mx6sabresd or mx6qsabreauto.
Do you still have plans on refreshing this series? It does seem very useful. Thanks _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot