Hi Mario, On 14 July 2017 at 05:55, Mario Six <mario....@gdsys.cc> wrote: > For debug purposes it is sometimes useful to have the ability to > interact with the driver functionality of a phy from the command line > (e.g. to manually issue startup, configuration, or shutdown commands to > the phy device). > > This patch adds such a command, which allows issuing the following > commands to a phy: > * getting the driver's name > * running the phy's configuration procedure (via calling phy_config) > * running the phy's startup procedure (via calling phy_startup) > * running the phy's shutdown procedure (via calling phy_shutdown) > > Signed-off-by: Mario Six <mario....@gdsys.cc> > --- > > cmd/Kconfig | 6 ++++++ > cmd/mdio.c | 65 > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > 2 files changed, 71 insertions(+)
This seems reasonable, but we need to figure out how to use driver model. Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot