xHCI spec says: the values of the 'route string' field shall be initialized by the first 'Address Device' command issued to a device slot, and shall not be modified by any other command.
So far U-Boot does not program this field, and it does not prevent SS device directly attached to root port, or HS device behind an HS hub, from working, due to the fact that 'route string' is used by the xHC to target SS packets. But in order to enumerate devices behind an SS hub, this field must be programmed. With this commit and along with previous commits, now SS & HS devices attached to a USB 3.0 hub can be enumerated by U-Boot. As usual, this new feature is only available when DM is on. Signed-off-by: Bin Meng <bmeng...@gmail.com> Reviewed-by: Simon Glass <s...@chromium.org> --- Test logs: two USB 3.0 hubs (one tier2, one tier3) => usb tree USB device tree: 1 Hub (5 Gb/s, 0mA) | U-Boot XHCI Host Controller | +-2 Hub (5 Gb/s, 0mA) | | GenesysLogic USB3.0 Hub | | | +-4 Hub (5 Gb/s, 0mA) | | | VIA Labs, Inc. USB3.0 Hub | | | | | +-7 Mass Storage (5 Gb/s, 76mA) | | JetFlash Mass Storage Device 16Q6ZPH20GF3E8UQ | | | +-8 Vendor specific (5 Gb/s, 36mA) | Realtek USB 10/100/1000 LAN 00E04C680977 | +-3 Hub (480 Mb/s, 100mA) | GenesysLogic USB2.0 Hub | +-5 Mass Storage (480 Mb/s, 200mA) | Netac OnlyDisk FF00ECB60800FFFF1526 | +-6 Hub (480 Mb/s, 0mA) VIA Labs, Inc. USB2.0 Hub Changes in v3: - fix build warnings for non-DM configuration Changes in v2: - handle port number is greater than 15 in route string drivers/usb/host/xhci-mem.c | 32 +++++++++++++++++++++++++++++++- 1 file changed, 31 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 9aa3092..c02059e 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -723,6 +723,11 @@ void xhci_setup_addressable_virt_dev(struct xhci_ctrl *ctrl, u64 trb_64 = 0; int slot_id = udev->slot_id; int speed = udev->speed; + int route = 0; +#ifdef CONFIG_DM_USB + struct usb_device *dev = udev; + struct usb_hub_device *hub; +#endif virt_dev = ctrl->devs[slot_id]; @@ -733,7 +738,32 @@ void xhci_setup_addressable_virt_dev(struct xhci_ctrl *ctrl, slot_ctx = xhci_get_slot_ctx(ctrl, virt_dev->in_ctx); /* Only the control endpoint is valid - one endpoint context */ - slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(1) | 0); + slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(1)); + +#ifdef CONFIG_DM_USB + /* Calculate the route string for this device */ + port_num = dev->portnr; + while (!usb_hub_is_root_hub(dev->dev)) { + hub = dev_get_uclass_priv(dev->dev); + /* + * Each hub in the topology is expected to have no more than + * 15 ports in order for the route string of a device to be + * unique. SuperSpeed hubs are restricted to only having 15 + * ports, but FS/LS/HS hubs are not. The xHCI specification + * says that if the port number the device is greater than 15, + * that portion of the route string shall be set to 15. + */ + if (port_num > 15) + port_num = 15; + route |= port_num << (hub->hub_depth * 4); + dev = dev_get_parent_priv(dev->dev); + port_num = dev->portnr; + dev = dev_get_parent_priv(dev->dev->parent); + } + + debug("route string %x\n", route); +#endif + slot_ctx->dev_info |= route; switch (speed) { case USB_SPEED_SUPER: -- 2.9.2 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot