SPL_SERIAL_SUPPORT and SPL_DRIVERS_MISC_SUPPORT were previously
enabled through rk3399_common.h. This change implies these options
through Kconfig.
These need to always be active for the RK3399, as follows:
- SPL_SERIAL_SUPPORT is needed to pass the SPL build
- SPL_DRIVERS_MISC_SUPPORT is needed to pass the SPL build
Signed-off-by: Philipp Tomsich <philipp.toms...@theobroma-systems.com>
---
Changes in v2:
- fixes the naming of SPL_DRIVERS_MISC_SUPPORT (shortened to
SPL_DRIVERS_MISC in v1 of this patch)
arch/arm/mach-rockchip/Kconfig | 2 ++
include/configs/rk3399_common.h | 2 --
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index fd08897..8406e33 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -92,6 +92,8 @@ config ROCKCHIP_RK3399
select SUPPORT_SPL
select SPL
select SPL_SEPARATE_BSS
+ select SPL_SERIAL_SUPPORT
+ select SPL_DRIVERS_MISC_SUPPORT
select ENABLE_ARM_SOC_BOOT0_HOOK
select DEBUG_UART_BOARD_INIT
help
diff --git a/include/configs/rk3399_common.h b/include/configs/rk3399_common.h
index 54ea97b..6c9d760 100644
--- a/include/configs/rk3399_common.h
+++ b/include/configs/rk3399_common.h
@@ -16,8 +16,6 @@
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
#if defined(CONFIG_SPL_SPI_SUPPORT)
#define CONFIG_SPL_SPI_LOAD
#endif
--
2.1.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
