In order to reuse the support for the u-boot,spl-boot-order property
from the rk3399, we split it into a reusable module that can be
included by the SPL code for any of our boards.
Signed-off-by: Philipp Tomsich <philipp.toms...@theobroma-systems.com>
---
Changes in v2:
- added in v2
arch/arm/mach-rockchip/Makefile | 2 +-
arch/arm/mach-rockchip/rk3399-board-spl.c | 104 ----------------------------
arch/arm/mach-rockchip/spl-boot-order.c | 108 ++++++++++++++++++++++++++++++
3 files changed, 109 insertions(+), 105 deletions(-)
create mode 100644 arch/arm/mach-rockchip/spl-boot-order.c
diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile
index 960f40f..c5d17f9 100644
--- a/arch/arm/mach-rockchip/Makefile
+++ b/arch/arm/mach-rockchip/Makefile
@@ -19,7 +19,7 @@ obj-spl-$(CONFIG_ROCKCHIP_RK3188) += rk3188-board-spl.o
obj-spl-$(CONFIG_ROCKCHIP_RK322X) += rk322x-board-spl.o
obj-spl-$(CONFIG_ROCKCHIP_RK3288) += rk3288-board-spl.o
obj-spl-$(CONFIG_ROCKCHIP_RK3368) += rk3368-board-spl.o
-obj-spl-$(CONFIG_ROCKCHIP_RK3399) += rk3399-board-spl.o
+obj-spl-$(CONFIG_ROCKCHIP_RK3399) += rk3399-board-spl.o spl-boot-order.o
ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
obj-$(CONFIG_ROCKCHIP_RK3188) += rk3188-board.o
diff --git a/arch/arm/mach-rockchip/rk3399-board-spl.c
b/arch/arm/mach-rockchip/rk3399-board-spl.c
index 710f7fe..a13b717 100644
--- a/arch/arm/mach-rockchip/rk3399-board-spl.c
+++ b/arch/arm/mach-rockchip/rk3399-board-spl.c
@@ -8,9 +8,6 @@
#include <debug_uart.h>
#include <dm.h>
#include <fdtdec.h>
-#include <led.h>
-#include <malloc.h>
-#include <mmc.h>
#include <ram.h>
#include <spl.h>
#include <asm/gpio.h>
@@ -21,111 +18,10 @@
#include <asm/arch/sdram.h>
#include <asm/arch/timer.h>
#include <dm/pinctrl.h>
-#include <dm/root.h>
-#include <dm/test.h>
-#include <dm/util.h>
#include <power/regulator.h>
DECLARE_GLOBAL_DATA_PTR;
-#if CONFIG_IS_ENABLED(OF_CONTROL)
-static int spl_node_to_boot_device(int node)
-{
- struct udevice *parent;
-
- /*
- * This should eventually move into the SPL code, once SPL becomes
- * aware of the block-device layer. Until then (and to avoid unneeded
- * delays in getting this feature out, it lives at the board-level).
- */
- if (!uclass_get_device_by_of_offset(UCLASS_MMC, node, &parent)) {
- struct udevice *dev;
- struct blk_desc *desc = NULL;
-
- for (device_find_first_child(parent, &dev);
- dev;
- device_find_next_child(&dev)) {
- if (device_get_uclass_id(dev) == UCLASS_BLK) {
- desc = dev_get_uclass_platdata(dev);
- break;
- }
- }
-
- if (!desc)
- return -ENOENT;
-
- switch (desc->devnum) {
- case 0:
- return BOOT_DEVICE_MMC1;
- case 1:
- return BOOT_DEVICE_MMC2;
- default:
- return -ENOSYS;
- }
- }
-
- /*
- * SPL doesn't differentiate SPI flashes, so we keep the detection
- * brief and inaccurate... hopefully, the common SPL layer can be
- * extended with awareness of the BLK layer (and matching OF_CONTROL)
- * soon.
- */
- if (!uclass_get_device_by_of_offset(UCLASS_SPI_FLASH, node, &parent))
- return BOOT_DEVICE_SPI;
-
- return -1;
-}
-
-void board_boot_order(u32 *spl_boot_list)
-{
- const void *blob = gd->fdt_blob;
- int chosen_node = fdt_path_offset(blob, "/chosen");
- int idx = 0;
- int elem;
- int boot_device;
- int node;
- const char *conf;
-
- if (chosen_node < 0) {
- debug("%s: /chosen not found, using spl_boot_device()\n",
- __func__);
- spl_boot_list[0] = spl_boot_device();
- return;
- }
-
- for (elem = 0;
- (conf = fdt_stringlist_get(blob, chosen_node,
- "u-boot,spl-boot-order", elem, NULL));
- elem++) {
- /* First check if the list element is an alias */
- const char *alias = fdt_get_alias(blob, conf);
- if (alias)
- conf = alias;
-
- /* Try to resolve the config item (or alias) as a path */
- node = fdt_path_offset(blob, conf);
- if (node < 0) {
- debug("%s: could not find %s in FDT", __func__, conf);
- continue;
- }
-
- /* Try to map this back onto SPL boot devices */
- boot_device = spl_node_to_boot_device(node);
- if (boot_device < 0) {
- debug("%s: could not map node @%x to a boot-device\n",
- __func__, node);
- continue;
- }
-
- spl_boot_list[idx++] = boot_device;
- }
-
- /* If we had no matches, fall back to spl_boot_device */
- if (idx == 0)
- spl_boot_list[0] = spl_boot_device();
-}
-#endif
-
u32 spl_boot_device(void)
{
return BOOT_DEVICE_MMC1;
diff --git a/arch/arm/mach-rockchip/spl-boot-order.c
b/arch/arm/mach-rockchip/spl-boot-order.c
new file mode 100644
index 0000000..4f78c72
--- /dev/null
+++ b/arch/arm/mach-rockchip/spl-boot-order.c
@@ -0,0 +1,108 @@
+/*
+ * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <mmc.h>
+#include <spl.h>
+
+#if CONFIG_IS_ENABLED(OF_CONTROL)
+static int spl_node_to_boot_device(int node)
+{
+ struct udevice *parent;
+
+ /*
+ * This should eventually move into the SPL code, once SPL becomes
+ * aware of the block-device layer. Until then (and to avoid unneeded
+ * delays in getting this feature out, it lives at the board-level).
+ */
+ if (!uclass_get_device_by_of_offset(UCLASS_MMC, node, &parent)) {
+ struct udevice *dev;
+ struct blk_desc *desc = NULL;
+
+ for (device_find_first_child(parent, &dev);
+ dev;
+ device_find_next_child(&dev)) {
+ if (device_get_uclass_id(dev) == UCLASS_BLK) {
+ desc = dev_get_uclass_platdata(dev);
+ break;
+ }
+ }
+
+ if (!desc)
+ return -ENOENT;
+
+ switch (desc->devnum) {
+ case 0:
+ return BOOT_DEVICE_MMC1;
+ case 1:
+ return BOOT_DEVICE_MMC2;
+ default:
+ return -ENOSYS;
+ }
+ }
+
+ /*
+ * SPL doesn't differentiate SPI flashes, so we keep the detection
+ * brief and inaccurate... hopefully, the common SPL layer can be
+ * extended with awareness of the BLK layer (and matching OF_CONTROL)
+ * soon.
+ */
+ if (!uclass_get_device_by_of_offset(UCLASS_SPI_FLASH, node, &parent))
+ return BOOT_DEVICE_SPI;
+
+ return -1;
+}
+
+void board_boot_order(u32 *spl_boot_list)
+{
+ const void *blob = gd->fdt_blob;
+ int chosen_node = fdt_path_offset(blob, "/chosen");
+ int idx = 0;
+ int elem;
+ int boot_device;
+ int node;
+ const char *conf;
+
+ if (chosen_node < 0) {
+ debug("%s: /chosen not found, using spl_boot_device()\n",
+ __func__);
+ spl_boot_list[0] = spl_boot_device();
+ return;
+ }
+
+ for (elem = 0;
+ (conf = fdt_stringlist_get(blob, chosen_node,
+ "u-boot,spl-boot-order", elem, NULL));
+ elem++) {
+ /* First check if the list element is an alias */
+ const char *alias = fdt_get_alias(blob, conf);
+ if (alias)
+ conf = alias;
+
+ /* Try to resolve the config item (or alias) as a path */
+ node = fdt_path_offset(blob, conf);
+ if (node < 0) {
+ debug("%s: could not find %s in FDT", __func__, conf);
+ continue;
+ }
+
+ /* Try to map this back onto SPL boot devices */
+ boot_device = spl_node_to_boot_device(node);
+ if (boot_device < 0) {
+ debug("%s: could not map node @%x to a boot-device\n",
+ __func__, node);
+ continue;
+ }
+
+ spl_boot_list[idx++] = boot_device;
+ }
+
+ /* If we had no matches, fall back to spl_boot_device */
+ if (idx == 0)
+ spl_boot_list[0] = spl_boot_device();
+}
+#endif
--
2.1.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
