Enable driver model for MMC (including BLK), SATA and USB. Note that USB
does not yet work correctly since the nodes are disabled. Hopefully this
can be resolved by the maintainer.
Signed-off-by: Simon Glass <s...@chromium.org>
---
Changes in v2: None
configs/cm_fx6_defconfig | 8 +++++++-
drivers/mmc/fsl_esdhc.c | 2 +-
2 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/configs/cm_fx6_defconfig b/configs/cm_fx6_defconfig
index c96285ba48..5de44ba861 100644
--- a/configs/cm_fx6_defconfig
+++ b/configs/cm_fx6_defconfig
@@ -11,6 +11,8 @@ CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_VIDEO=y
# CONFIG_CMD_BMODE is not set
+CONFIG_DEFAULT_DEVICE_TREE="imx6q-cm-fx6"
+CONFIG_AHCI=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6QDL"
CONFIG_ENV_IS_IN_SPI_FLASH=y
@@ -48,6 +50,8 @@ CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_CMD_MTDPARTS=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM_MMC=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_SPI_FLASH_EON=y
@@ -57,9 +61,11 @@ CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_SST=y
CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_REGULATOR=y
CONFIG_USB=y
+CONFIG_DM_USB=y
CONFIG_USB_STORAGE=y
CONFIG_USB_KEYBOARD=y
CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
-CONFIG_OF_LIBFDT=y
CONFIG_FDT_FIXUP_PARTITIONS=y
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index a3dababda6..870caa3108 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -866,7 +866,7 @@ static int fsl_esdhc_init(struct fsl_esdhc_priv *priv,
return 0;
}
-#ifndef CONFIG_DM_MMC
+#if !CONFIG_IS_ENABLED(DM_MMC)
static int fsl_esdhc_cfg_to_priv(struct fsl_esdhc_cfg *cfg,
struct fsl_esdhc_priv *priv)
{
--
2.14.0.rc0.400.g1c36432dff-goog
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
