On Thu, Jul 27, 2017 at 11:42:36PM +0400, Dmitry Korunov wrote: > Signed-off-by: Dmitry Korunov <desse...@gmail.com>
How about a summary of the board? CPU Memory Storage USB Wi-fi Ethernet etc. > --- > arch/arm/dts/bcm2835-rpi-zero-w.dts | 44 > ++++++++++++++++++++++++++++++++++ > arch/arm/dts/bcm283x-rpi-usb-host.dtsi | 3 +++ > arch/arm/mach-bcm283x/Kconfig | 16 +++++++++++++ > board/raspberrypi/rpi/rpi.c | 5 ++++ > configs/rpi_0_w_defconfig | 28 ++++++++++++++++++++++ > include/configs/rpi.h | 2 +- > 6 files changed, 97 insertions(+), 1 deletion(-) > create mode 100644 arch/arm/dts/bcm2835-rpi-zero-w.dts > create mode 100644 arch/arm/dts/bcm283x-rpi-usb-host.dtsi > create mode 100644 configs/rpi_0_w_defconfig > > diff --git a/arch/arm/dts/bcm2835-rpi-zero-w.dts > b/arch/arm/dts/bcm2835-rpi-zero-w.dts > new file mode 100644 > index 0000000..c63937d > --- /dev/null > +++ b/arch/arm/dts/bcm2835-rpi-zero-w.dts > @@ -0,0 +1,44 @@ > +/* > + * Copyright (C) 2016 Stefan Wahren <stefan.wah...@i2se.com> Is this still correct? > --- a/arch/arm/mach-bcm283x/Kconfig > +++ b/arch/arm/mach-bcm283x/Kconfig > @@ -44,6 +44,22 @@ config TARGET_RPI > This option creates a build targetting the ARM1176 ISA. > select BCM2835 > > +config TARGET_RPI_0_W > + bool "Raspberry Pi Ziro W" Surplus space before W. > + help > + Support for all ARM1176-/BCM2835-based Raspberry Pi variants, such as > + the RPi Zero model W. So which is it? "Ziro W" or "Zero W"? Your commit message summary says "Ziro W" but your patch is mostly about the "Zero W". > + > + This option assumes the VideoCore firmware is configured to use the > + mini UART (rather than PL011) for the serial console. This is the > + default on the RPi Zero W. To enable the UART console, the following > + non-default option must be present in config.txt: enable_uart=1. > + This is required for U-Boot to operate correctly, even if you only > + care about the HDMI/usbkbd console. > + > + This option creates a build targetting the ARMv7/AArch32 ISA. > + select BCM2835 > + > config TARGET_RPI_2 > bool "Raspberry Pi 2" > help > diff --git a/include/configs/rpi.h b/include/configs/rpi.h > index d715eaa..0ead8d7 100644 > --- a/include/configs/rpi.h > +++ b/include/configs/rpi.h > @@ -80,7 +80,7 @@ > #endif > > /* Console UART */ > -#ifdef CONFIG_BCM2837 > +#if defined (CONFIG_BCM2837) || defined(CONFIG_TARGET_RPI_0_W) Another surplus space. -- Rask Ingemann Lambertsen _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
