The RK3368 needs to have a different base-address and stack-pointer
for its TPL stage. Now that we want to do this via Kconfig, we need
to tick the appropriate 'TPL_NEEDS_...' boxes.
Signed-off-by: Philipp Tomsich <philipp.toms...@theobroma-systems.com>
Reviewed-by: Simon Glass <s...@chromium.org>
---
Changes in v4:
- use 'select if' for SPL/TPL presets that need SPL/TPL to avoid errors
on defconfig, if SPL/TPL is not enabled (thanks to Andy for noticing)
Changes in v3:
- changes Kconfig, so RK3368 will notify the SPL configuration of
its need to have the TPL text-base, stack-pointer and max-size
configured
Changes in v2: None
arch/arm/mach-rockchip/Kconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index 4a6f629..45029d1 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -69,6 +69,8 @@ config ROCKCHIP_RK3368
select ARM64
select SUPPORT_SPL
select SUPPORT_TPL
+ select TPL_NEEDS_SEPARATE_TEXT_BASE if SPL
+ select TPL_NEEDS_SEPARATE_STACK if TPL
imply SPL_SEPARATE_BSS
imply SPL_SERIAL_SUPPORT
imply TPL_SERIAL_SUPPORT
--
2.1.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
