With SPL and TPL support for the RK3368 in place, mark SPL and TPL as
supported from Kconfig for the RK3368. As this is primarily tested on
the RK3368-uQ7, we'll leave it to board's individual defconfig to
enable.
Also enable DEBUG_UART_BOARD_INIT for the RK3368, so we get output
during the early boot-up, as we turn on TPL and SPL.
Signed-off-by: Philipp Tomsich <philipp.toms...@theobroma-systems.com>
Reviewed-by: Simon Glass <s...@chromium.org>
---
Changes in v4:
- use imply for SPL/TPL preselects where SPL/TPL may not be enabled
to avoid warning on applying a defconfig (thanks to Andy for reporting)
Changes in v3: None
Changes in v2: None
arch/arm/mach-rockchip/Kconfig | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index 8a89b51..b6f40d0 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -67,6 +67,13 @@ config ROCKCHIP_RK3328
config ROCKCHIP_RK3368
bool "Support Rockchip RK3368"
select ARM64
+ select SUPPORT_SPL
+ select SUPPORT_TPL
+ imply SPL_SEPARATE_BSS
+ imply SPL_SERIAL_SUPPORT
+ imply TPL_SERIAL_SUPPORT
+ select ENABLE_ARM_SOC_BOOT0_HOOK
+ select DEBUG_UART_BOARD_INIT
select SYS_NS16550
help
The Rockchip RK3368 is a ARM-based SoC with a octa-core (organised
--
2.1.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
