From: Stefan Agner <stefan.ag...@toradex.com> Enable Serial Download Protocol (SDP) in SPL and U-Boot. This is useful to make use of imx_usb to download the complete U-Boot (u-boot.img) after SPL has been downloaded. The U-Boot command sdp allows to enumerate as SDP capable device again, e.g. to download a Linux kernel and/or U-Boot script.
Signed-off-by: Stefan Agner <stefan.ag...@toradex.com> Acked-by: Max Krummenacher <max.krummenac...@toradex.com> --- configs/apalis_imx6_defconfig | 4 ++++ configs/colibri_imx6_defconfig | 4 ++++ 2 files changed, 8 insertions(+) diff --git a/configs/apalis_imx6_defconfig b/configs/apalis_imx6_defconfig index 4d88e70200..2a271f002c 100644 --- a/configs/apalis_imx6_defconfig +++ b/configs/apalis_imx6_defconfig @@ -17,6 +17,9 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL=y CONFIG_SPL_DMA_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_USB_HOST_SUPPORT=y +CONFIG_SPL_USB_GADGET_SUPPORT=y +CONFIG_SPL_USB_SDP_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Apalis iMX6 # " CONFIG_CMD_BOOTZ=y @@ -31,6 +34,7 @@ CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DFU=y +CONFIG_CMD_USB_SDP=y CONFIG_CMD_USB_MASS_STORAGE=y # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y diff --git a/configs/colibri_imx6_defconfig b/configs/colibri_imx6_defconfig index a23975f858..d5d3e7a143 100644 --- a/configs/colibri_imx6_defconfig +++ b/configs/colibri_imx6_defconfig @@ -17,6 +17,9 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL=y CONFIG_SPL_DMA_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_USB_HOST_SUPPORT=y +CONFIG_SPL_USB_GADGET_SUPPORT=y +CONFIG_SPL_USB_SDP_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Colibri iMX6 # " CONFIG_CMD_BOOTZ=y @@ -31,6 +34,7 @@ CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DFU=y +CONFIG_CMD_USB_SDP=y CONFIG_CMD_USB_MASS_STORAGE=y # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y -- 2.13.3 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot