> The RK3368 has two SD/MMC controllers that can be used from U-Boot > both during SPL and for booting an OS from the full bootloader stage. > While both are configured to (mostly) sensible settings from the BROM, > additional configuration for the MMC controller is needed to configure > it to 8bit mode. > > This adds pinctrl support for the MMC controller. > > Signed-off-by: Philipp Tomsich <philipp.toms...@theobroma-systems.com> > > Reviewed-by: Simon Glass <s...@chromium.org> > --- > > Changes in v4: None > Changes in v3: None > Changes in v2: > - removed the RK3368 prefix on the SD/MMC pin definitions > > drivers/pinctrl/rockchip/pinctrl_rk3368.c | 48 > +++++++++++++++++++++++++++++++ > 1 file changed, 48 insertions(+) >
Applied to u-boot-rockchip, thanks! _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
