From: Udit Agarwal <udit.agar...@nxp.com> Adds header address for PPA to be validated during ESBC phase for ARCH_LS2088 and QSPI_BOOT.
Moves sec_init prior to ppa_init as for validation of PPA, sec must be initialised before the PPA is initialised. Signed-off-by: Udit Agarwal <udit.agar...@nxp.com> --- Changes in v3: Rebasing of the patches on the top commit and removes conflict on CONFIG_EXTRA_ENV_SETTINGS. This patch supersedes https://patchwork.ozlabs.org/patch/767679/ arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 3 ++- arch/arm/include/asm/fsl_secure_boot.h | 5 +++++ board/freescale/ls2080aqds/ls2080aqds.c | 7 +++---- board/freescale/ls2080ardb/ls2080ardb.c | 4 ++++ 4 files changed, 14 insertions(+), 5 deletions(-) diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index b7549a0..f14b1c8 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -197,7 +197,8 @@ config SYS_LS_PPA_ESBC_ADDR default 0x60680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1043A default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1046A default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1012A - default 0x580680000 if SYS_LS_PPA_FW_IN_XIP && FSL_LSCH3 + default 0x20680000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT && ARCH_LS2080A + default 0x580680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A default 0x680000 if SYS_LS_PPA_FW_IN_MMC default 0x680000 if SYS_LS_PPA_FW_IN_NAND help diff --git a/arch/arm/include/asm/fsl_secure_boot.h b/arch/arm/include/asm/fsl_secure_boot.h index 63845a2..ec6463d 100644 --- a/arch/arm/include/asm/fsl_secure_boot.h +++ b/arch/arm/include/asm/fsl_secure_boot.h @@ -72,8 +72,13 @@ * DDR memory map */ #ifdef CONFIG_FSL_LSCH3 +#ifdef CONFIG_QSPI_BOOT +#define CONFIG_BS_ADDR_DEVICE 0x20600000 +#define CONFIG_BS_HDR_ADDR_DEVICE 0x20640000 +#else /* NOR BOOT */ #define CONFIG_BS_ADDR_DEVICE 0x580600000 #define CONFIG_BS_HDR_ADDR_DEVICE 0x580640000 +#endif /*ifdef CONFIG_QSPI_BOOT */ #define CONFIG_BS_SIZE 0x00001000 #define CONFIG_BS_HDR_SIZE 0x00004000 #define CONFIG_BS_ADDR_RAM 0xa0600000 diff --git a/board/freescale/ls2080aqds/ls2080aqds.c b/board/freescale/ls2080aqds/ls2080aqds.c index f36fb98..be4e8ee 100644 --- a/board/freescale/ls2080aqds/ls2080aqds.c +++ b/board/freescale/ls2080aqds/ls2080aqds.c @@ -226,15 +226,14 @@ int board_init(void) #endif select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT); rtc_enable_32khz_output(); +#ifdef CONFIG_FSL_CAAM + sec_init(); +#endif #ifdef CONFIG_FSL_LS_PPA ppa_init(); #endif -#ifdef CONFIG_FSL_CAAM - sec_init(); -#endif - return 0; } diff --git a/board/freescale/ls2080ardb/ls2080ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c index df2d768..4c42c73 100644 --- a/board/freescale/ls2080ardb/ls2080ardb.c +++ b/board/freescale/ls2080ardb/ls2080ardb.c @@ -231,6 +231,10 @@ int board_init(void) #ifdef CONFIG_FSL_QIXIS QIXIS_WRITE(rst_ctl, QIXIS_RST_CTL_RESET_EN); #endif + +#ifdef CONFIG_FSL_CAAM + sec_init(); +#endif #ifdef CONFIG_FSL_LS_PPA ppa_init(); #endif -- 1.9.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
