With DM video, this is not used any more. Drop it.
Signed-off-by: Bin Meng <bmeng...@gmail.com>
---
drivers/pci/pci_rom.c | 41 -----------------------------------------
include/vbe.h | 2 --
2 files changed, 43 deletions(-)
diff --git a/drivers/pci/pci_rom.c b/drivers/pci/pci_rom.c
index 75fb093..46fe5e6 100644
--- a/drivers/pci/pci_rom.c
+++ b/drivers/pci/pci_rom.c
@@ -202,47 +202,6 @@ static int pci_rom_load(struct pci_rom_header *rom_header,
struct vbe_mode_info mode_info;
-int vbe_get_video_info(struct graphic_device *gdev)
-{
-#ifdef CONFIG_FRAMEBUFFER_SET_VESA_MODE
- struct vesa_mode_info *vesa = &mode_info.vesa;
-
- gdev->winSizeX = vesa->x_resolution;
- gdev->winSizeY = vesa->y_resolution;
-
- gdev->plnSizeX = vesa->x_resolution;
- gdev->plnSizeY = vesa->y_resolution;
-
- gdev->gdfBytesPP = vesa->bits_per_pixel / 8;
-
- switch (vesa->bits_per_pixel) {
- case 32:
- case 24:
- gdev->gdfIndex = GDF_32BIT_X888RGB;
- break;
- case 16:
- gdev->gdfIndex = GDF_16BIT_565RGB;
- break;
- default:
- gdev->gdfIndex = GDF__8BIT_INDEX;
- break;
- }
-
- gdev->isaBase = CONFIG_SYS_ISA_IO_BASE_ADDRESS;
- gdev->pciBase = vesa->phys_base_ptr;
-
- gdev->frameAdrs = vesa->phys_base_ptr;
- gdev->memSize = vesa->bytes_per_scanline * vesa->y_resolution;
-
- gdev->vprBase = vesa->phys_base_ptr;
- gdev->cprBase = vesa->phys_base_ptr;
-
- return gdev->winSizeX ? 0 : -ENOSYS;
-#else
- return -ENOSYS;
-#endif
-}
-
void setup_video(struct screen_info *screen_info)
{
struct vesa_mode_info *vesa = &mode_info.vesa;
diff --git a/include/vbe.h b/include/vbe.h
index 16bb096..d6980d9 100644
--- a/include/vbe.h
+++ b/include/vbe.h
@@ -104,8 +104,6 @@ struct vbe_ddc_info {
extern struct vbe_mode_info mode_info;
-struct graphic_device;
-int vbe_get_video_info(struct graphic_device *gdev);
struct video_priv;
struct video_uc_platdata;
int vbe_setup_video_priv(struct vesa_mode_info *vesa,
--
2.9.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
