Hi Jaehoon, On 17 August 2017 at 01:40, Jaehoon Chung <jh80.ch...@samsung.com> wrote: > > Hi Simon, > > On 07/30/2017 02:34 AM, Simon Glass wrote: > > Note: This series is rebased to u-boot-mmc/master with a fix-up patch > > for a broken patch there. > > > > This series completes the conversion of SATA to driver model. > > > > Previous work converted SCSI including the SCSI-based SATA driver. This > > series converts the AHCI uclass itself, adding operations and adjusting > > the 'sata' command to work correctly. > > > > An existing board (Compulab Utilite) is used for this work. It uses SATA > > without the SCSI layer. Unfortunately this board does not currently use > > driver model for MMC or USB, nor does it include a device tree. Therefore > > additional patches are included in this series to convert this over. Note > > that USB is rendered inoperative since the relevant device-tree nodes are > > disabled. Further work is needed here (e.g. by the board maintainer) but > > it is well beyond the objective of this series. > > > > A long-standing niggle with MMC has been the CONFIG_DM_MMC_OPS option. > > This was introduced to allow driver model to handle MMC operations rather > > than having them in struct mmc. This was needed since the original uclass > > did not have support for operations. > > > > At present i.MX is the only SoC that defines CONFIG_DM_MMC without > > CONFIG_DM_MMC_OPS. With this driver converted, the option is no longer > > necessary so this series takes the opportunity to drop that option. > > Sorry for late. I applied these patches to u-boot-mmc after fixing some > conflicts. > Now i'm testing buildman..There is no problem. i will send PR to Tom. > > Sorry again. >
That's great, thanks for getting through this! Let me know if any issues and I can take a look. Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
