Hi Troy,
On 08/28/2017 09:42 AM, Troy Kisky wrote:
On 8/27/2017 3:04 PM, Eric Nelson wrote:
This adds support for USB boot mode on the i.MX7D SoC, which
is most useful when doing U-Boot development on this chip.
i.e., it enables you to enter the ROM boot loader's serial
download protocol using the command:
=> bmode usb
Signed-off-by: Eric Nelson <e...@nelint.com>
---
arch/arm/mach-imx/mx7/soc.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/mach-imx/mx7/soc.c b/arch/arm/mach-imx/mx7/soc.c
index 87bf105..63ee59f 100644
--- a/arch/arm/mach-imx/mx7/soc.c
+++ b/arch/arm/mach-imx/mx7/soc.c
@@ -372,6 +372,8 @@ void set_wdog_reset(struct wdog_regs *wdog)
* to SBMR1, which will determine the boot device.
*/
const struct boot_mode soc_boot_modes[] = {
You might want to add
+ {"normal", MAKE_CFGVAL(0x00, 0x00, 0x00, 0x00)},
while you're at it, to undo with "bmode normal"
Normal, meaning "don't override"?
Why would you want to do this?
Please advise,
Eric
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
