> -----Original Message-----
> From: Jagan Teki [mailto:jagannadh.t...@gmail.com]
> Sent: Tuesday, August 29, 2017 10:48 PM
> To: Yogesh Narayan Gaur <yogeshnarayan.g...@nxp.com>
> Cc: u-boot@lists.denx.de; York Sun <york....@nxp.com>
> Subject: Re: [PATCH] mtd/spi: Add MT35XU512ABA1G12 NOR flash support
> 
> On Tue, Aug 29, 2017 at 9:42 PM, Yogesh Narayan Gaur
> <yogeshnarayan.g...@nxp.com> wrote:
> >
> >
> >> -----Original Message-----
> >> From: Jagan Teki [mailto:jagannadh.t...@gmail.com]
> >> Sent: Friday, August 11, 2017 4:03 PM
> >> To: Yogesh Narayan Gaur <yogeshnarayan.g...@nxp.com>
> >> Cc: u-boot@lists.denx.de; York Sun <york....@nxp.com>
> >> Subject: Re: [PATCH] mtd/spi: Add MT35XU512ABA1G12 NOR flash support
> >>
> >> On Fri, Aug 11, 2017 at 3:38 PM, Yogesh Narayan Gaur
> >> <yogeshnarayan.g...@nxp.com> wrote:
> >> >
> >> >
> >> >> -----Original Message-----
> >> >> From: Jagan Teki [mailto:jagannadh.t...@gmail.com]
> >> >> Sent: Friday, August 11, 2017 3:32 PM
> >> >> To: Yogesh Narayan Gaur <yogeshnarayan.g...@nxp.com>
> >> >> Cc: u-boot@lists.denx.de; York Sun <york....@nxp.com>
> >> >> Subject: Re: [PATCH] mtd/spi: Add MT35XU512ABA1G12 NOR flash
> >> >> support
> >> >>
> >> >> On Fri, Aug 11, 2017 at 3:30 PM, Yogesh Narayan Gaur
> >> >> <yogeshnarayan.g...@nxp.com> wrote:
> >> >> >
> >> >> >
> >> >> >> -----Original Message-----
> >> >> >> From: Jagan Teki [mailto:jagannadh.t...@gmail.com]
> >> >> >> Sent: Friday, August 11, 2017 3:25 PM
> >> >> >> To: Yogesh Narayan Gaur <yogeshnarayan.g...@nxp.com>
> >> >> >> Cc: u-boot@lists.denx.de; York Sun <york....@nxp.com>
> >> >> >> Subject: Re: [PATCH] mtd/spi: Add MT35XU512ABA1G12 NOR flash
> >> >> >> support
> >> >> >>
> >> >> >> On Tue, Aug 1, 2017 at 9:43 AM, Yogesh Gaur
> >> >> >> <yogeshnarayan.g...@nxp.com>
> >> >> >> wrote:
> >> >> >> > Add MT35XU512ABA1G12 parameters to NOR flash parameters
> array.
> >> >> >> > Since the manufactory ID is changed to 0x2C, add it for
> >> >> >> > micron and using it for relevant settings.
> >> >> >> >
> >> >> >> > The MT35XU512ABA1G12 only supports 1 bit mode and 8 bits. It
> >> >> >> > can't support dual and quad. Supports subsector erase with
> >> >> >> > 4KB granularity, have support of FSR(flag status register)
> >> >> >> > and flash size is
> >> 64MB.
> >> >> >> > ---
> >> >> >> >  drivers/mtd/spi/sf_internal.h   | 1 +
> >> >> >> >  drivers/mtd/spi/spi_flash.c     | 2 ++
> >> >> >> >  drivers/mtd/spi/spi_flash_ids.c | 1 +
> >> >> >> >  3 files changed, 4 insertions(+)
> >> >> >> >
> >> >> >> > diff --git a/drivers/mtd/spi/sf_internal.h
> >> >> >> > b/drivers/mtd/spi/sf_internal.h index 839cdbe..f46cb3a 100644
> >> >> >> > --- a/drivers/mtd/spi/sf_internal.h
> >> >> >> > +++ b/drivers/mtd/spi/sf_internal.h
> >> >> >> > @@ -33,6 +33,7 @@ enum spi_nor_option_flags {
> >> >> >> >  /* CFI Manufacture ID's */
> >> >> >> >  #define SPI_FLASH_CFI_MFR_SPANSION     0x01
> >> >> >> >  #define SPI_FLASH_CFI_MFR_STMICRO      0x20
> >> >> >> > +#define SPI_FLASH_CFI_MFR_MICRON       0x2C
> >> >> >>
> >> >> >> Does this new mfr id from micro? so 0x20 still exists?
> >> >> >>
> >> >> > On older Micron flash like MT25QU512ABB mfr id still is 0x20 but
> >> >> > in newer
> >> >> flash, MT35X, it's been changed to 0x2c.
> >> >>
> >> >> OK, so the flash features like quad ennoblements, opcodes remains same?
> >> >> except the mfr?
> >> >>
> >> > This flash support single bit and octal bit cmds no dual or quad support.
> >> > Opcode for read/write/erase and other register operation related
> >> > cmds are
> >> similar to already supported flashes like MT25QU512ABB(n25q512a in
> >> existing table).
> >> > Only mfr id has been modified.
> >>
> >> OK.
> >
> > Did this patch needs to be modified further or can be upstreamed?
> 
> Yes, ie what I commented in previous thread.
> 


Updated the patch and sent on mailing list again.

--
Thanks

> thanks!
> --
> Jagan Teki
> Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream
> Maintainer Hyderabad, India.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to