Hi Fabio,
On 08/31/2017 06:56 AM, Fabio Estevam wrote:
On Thu, Aug 31, 2017 at 10:35 AM, Fabio Estevam <feste...@gmail.com> wrote:
Hi Eric,
On Wed, Aug 30, 2017 at 7:13 PM, Eric Nelson <e...@nelint.com> wrote:
This adds support for two additional boot modes on the i.MX7D SoC, which
is most useful when doing U-Boot development on this chip.
1. "bmode usb" can be used to force the ROM boot loader's serial
2. "bmode normal" can be used to revert to the normal boot mode
as specified by fuses and BOOT_MODE pins
Signed-off-by: Eric Nelson <e...@nelint.com>
I tried testing your patch on a imx7d sabresd, but it seems there is
an issue with bmode that is unrelated to your patch.
I also did:
diff --git a/configs/mx7dsabresd_defconfig b/configs/mx7dsabresd_defconfig
index 8f2e33a..c70fde8 100644
--- a/configs/mx7dsabresd_defconfig
+++ b/configs/mx7dsabresd_defconfig
@@ -5,7 +5,6 @@ CONFIG_VIDEO=y
# CONFIG_ARMV7_VIRT is not set
CONFIG_IMX_RDC=y
CONFIG_IMX_BOOTAUX=y
-# CONFIG_CMD_BMODE is not set
CONFIG_DEFAULT_DEVICE_TREE="imx7d-sdb"
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx7dsabresd/imximage.cfg"
CONFIG_BOOTDELAY=3
so that bmode command can be added.
However I am getting:
=> bmode usb
bmode - <NULL>
I missed to add 'add_board_boot_modes(board_boot_modes);'
Now I get:
=> bmode usb
resetting ...
U-Boot 2017.09-rc2-36996-g63af4b0-dirty (Aug 31 2017 - 10:53:12 -0300)
CPU: Freescale i.MX7D rev1.2 1000 MHz (running at 792 MHz)
CPU: Commercial temperature grade (0C to 95C) at 41C
Reset cause: POR
Model: Freescale i.MX7 SabreSD Board
Board: i.MX7D SABRESD in non-secure mode
DRAM: 1 GiB
PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11
MMC:
MMC Device 0 not found
*** Warning - No MMC card found, using default environment
Video: 480x272x24
In: serial
Out: serial
Err: serial
Net: FEC0
Hit any key to stop autoboot: 0
=>
So the board is resetting instead of going into serial download mode.
Any ideas?
I'm not sure. Since I'm currently working with a board with no
fuses blown, I'm getting USB mode either way ;)...
I have an MX7 SABRE SD and I'll try it out there.
Regards,
Eric
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot