Hi Eric, On Mon, Sep 4, 2017 at 11:37 PM, Eric Nelson <ericnelso...@gmail.com> wrote:
>> --- a/include/configs/mx6sabre_common.h >> +++ b/include/configs/mx6sabre_common.h >> @@ -225,7 +225,11 @@ >> #define CONFIG_BMP_16BPP >> #define CONFIG_VIDEO_LOGO >> #define CONFIG_VIDEO_BMP_LOGO >> -#define CONFIG_IPUV3_CLK 260000000 >> +#ifdef CONFIG_MX6DL >> +#define CONFIG_IPUV3_CLK 198000000 >> +#else >> +#define CONFIG_IPUV3_CLK 264000000 >> +#endif > > > > Note that this should probably be applied for other boards > which are compiled for multiple CPU types. > > At least the Boundary Nitrogen boards, but probably others > like Wand have ordering options for DL or Solo processors > and may need the reduced clock rate. Agreed. The clock frequency decision should be done in run-time rather than in build-time. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot