Andy, > On 19 Sep 2017, at 09:19, Andy Yan <andy....@rock-chips.com> wrote: > > Hi Philipp: > > > On 2017年09月19日 10:06, Andy Yan wrote: >> Hi Philipp: >> >> >> On 2017年09月19日 02:18, Philipp Tomsich wrote: >>> Recent discussions confirmed (what the code always assumed): the >>> Rockchip BROM always enters U-Boot with the stack-pointer valid >>> (i.e. the U-Boot startup code is running off the BROM stack). >>> >>> We can thus replace the back-to-bootrom code (i.e. both the >>> save_boot_params and back_to_bootrom implementations) using C-code >>> based on setjmp/longjmp. The new implementation is already structured >>> to allow an easy drop-in of Andy's changes to enter download-mode when >>> returning to the BROM. >>> >>> This entails one minor tweak to asm/system.h, which only exported >>> the save_boot_params_ret prototype for ARMv7, but not for AArch64. >>> >>> For v2, we force bootrom.o to alway be emitted as A32 (not T32), so we >>> can safely call save_boot_params_ret(). >> >> This still have a problem, because the setjmp implementation for ARM32 >> platform has humb code when CONFIG_SYS_THUMB_BUILD is >> enabled, this is a default setting for most ARMv7 boards. >> #if CONFIG_IS_ENABLED(SYS_THUMB_BUILD) >> ".align 2\n" >> "adr r0, jmp_target\n" >> "add r0, r0, $1\n" // r0 stored the jump target address and with bit[0] = >> 1, this will trigger a thumb switch in longjmp with code "bx r0" >> #endif >> >> When I force the setjmp code go arm code path, I can back to bootrom >> successfully, But I got a data abort exception in later. it seems it happens >> when bootrom finished the uboot code >> copy, when jump to sdram, I need a further debug. > > I found that r9 also need to be preserved, it seems that it hold the sdram > base.
Thanks for testing and debugging: this is invaluable support, as I only have AArch64 boards to test. The r9 issue will be easy enough to resolve. However, it looks like I will need more work on setjmp/longjmp to make this safe both for T32 and A32. Plus: I need to figure out why this didn’t show in my disassembly (I don’t remember whether it was a rk3188 or rk3288 board I looked at). Might be tomorrow or Thursday until I can provide an new version. Regards, Philipp. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot