On 09/27/2017 06:13 PM, Masahiro Yamada wrote: > 2017-09-28 0:50 GMT+09:00 Marek Vasut <marek.va...@gmail.com>: >> On 09/27/2017 05:19 PM, Masahiro Yamada wrote: >>> 2017-09-26 16:41 GMT+09:00 Jaehoon Chung <jh80.ch...@samsung.com>: >>>> Hi Marek, >>>> >>>> On 09/26/2017 01:47 AM, Marek Vasut wrote: >>>>> On 09/15/2017 09:10 PM, Marek Vasut wrote: >>>>>> Add initial support for setting the vqmmc regulator. Since we do not >>>>>> support 1V8 modes, set the regulator to 3V3 and enable it. >>>>>> >>>>>> Signed-off-by: Marek Vasut <marek.vasut+rene...@gmail.com> >>>>>> Cc: Masahiro Yamada <yamada.masah...@socionext.com> >>>>>> Cc: Jaehoon Chung <jh80.ch...@samsung.com> >>>>> >>>>> Anything ?! I don't see this in the PR ... >>>> >>>> Sorry...I missed this patch..First, i have checked on patchwork. >>>> Will pick this patch into u-boot-mmc. >>>> >>>> Best Regards, >>>> Jaehoon Chung >>>> >>> >>> >>> UniPhier SoCs have different mechanism for 3.3/1.8 switching, >>> but it is not a problem for me because I do not have a plan >>> for enabling CONFIG_DM_REGULATOR. >>> >>> Acked-by: Masahiro Yamada <yamada.masah...@socionext.com> >> >> Cool, thanks! >> >> Is there a documentation for the uniphier mechanism somewhere ? >> > > No document available.
I hope that new 96borad will have documentation available, *ahem* :-) > Only crappy private documents. > > They say SoC spec books are CONFIDENTIAL!! > Sigh. OK, I'll keep in mind there's a uniphier-specific way to toggle the 1V8 when adding HS200 support, so you can fill that in when you have time. Thanks! -- Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot