Signed-off-by: Mario Six <mario....@gdsys.cc>
---
 drivers/mtd/cfi_flash.c | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index 06795fe754..b73b72bcee 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -611,8 +611,8 @@ static int flash_full_status_check(flash_info_t *info, 
flash_sect_t sector,
        case CFI_CMDSET_INTEL_PROG_REGIONS:
        case CFI_CMDSET_INTEL_EXTENDED:
        case CFI_CMDSET_INTEL_STANDARD:
-               if ((retcode == ERR_OK)
-                   && !flash_isset(info, sector, 0, FLASH_STATUS_DONE)) {
+               if ((retcode == ERR_OK) &&
+                       !flash_isset(info, sector, 0, FLASH_STATUS_DONE)) {
                        retcode = ERR_INVAL;
                        printf("Flash %s error at address %lx\n", prompt,
                                info->start[sector]);
@@ -761,8 +761,8 @@ static flash_sect_t find_sector(flash_info_t *info, ulong 
addr)
        if ((info != saved_info) || (sector >= info->sector_count))
                sector = 0;
 
-       while ((info->start[sector] < addr)
-                       && (sector < info->sector_count - 1))
+       while ((info->start[sector] < addr) &&
+               (sector < info->sector_count - 1))
                sector++;
        while ((info->start[sector] > addr) && (sector > 0))
                /*
@@ -1435,8 +1435,8 @@ static inline int manufact_match(flash_info_t *info, u32 
manu)
 
 static int cfi_protect_bugfix(flash_info_t *info, long sector, int prot)
 {
-       if (manufact_match(info, INTEL_MANUFACT)
-           && info->device_id == NUMONYX_256MBIT) {
+       if (manufact_match(info, INTEL_MANUFACT) &&
+               info->device_id == NUMONYX_256MBIT) {
                /*
                 * see errata called
                 * "Numonyx Axcell P33/P30 Specification Update" :)
@@ -1801,8 +1801,8 @@ static int flash_detect_legacy(phys_addr_t base, int 
banknum)
                                        (ulong)map_physmem(base,
                                                           info->portwidth,
                                                           MAP_NOCACHE);
-                               if (info->portwidth == FLASH_CFI_8BIT
-                                       && info->interface == FLASH_CFI_X8X16) {
+                               if (info->portwidth == FLASH_CFI_8BIT &&
+                                       info->interface == FLASH_CFI_X8X16) {
                                        info->addr_unlock1 = 0x2AAA;
                                        info->addr_unlock2 = 0x5555;
                                } else {
@@ -1886,9 +1886,9 @@ static int __flash_detect_cfi(flash_info_t *info, struct 
cfi_qry *qry)
             cfi_offset++) {
                flash_write_cmd(info, 0, flash_offset_cfi[cfi_offset],
                                 FLASH_CMD_CFI);
-               if (flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP, 'Q')
-                   && flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 1, 'R')
-                   && flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 2, 'Y')) {
+               if (flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP, 'Q') &&
+                       flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 1, 'R') 
&&
+                       flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 2, 'Y')) 
{
                        flash_read_cfi(info, qry, FLASH_OFFSET_CFI_RESP,
                                        sizeof(struct cfi_qry));
                        info->interface = le16_to_cpu(qry->interface_desc);
@@ -2138,8 +2138,8 @@ ulong flash_get_size(phys_addr_t base, int banknum)
 
                size_ratio = info->portwidth / info->chipwidth;
                /* if the chip is x8/x16 reduce the ratio by half */
-               if ((info->interface == FLASH_CFI_X8X16)
-                   && (info->chipwidth == FLASH_CFI_BY8)) {
+               if ((info->interface == FLASH_CFI_X8X16) &&
+                       (info->chipwidth == FLASH_CFI_BY8)) {
                        size_ratio >>= 1;
                }
                debug("size_ratio %d port %d bits chip %d bits\n",
-- 
2.11.0

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to