The "ubi part" command is failing for me on my PowerPC 85xx board. I am not trying to do anything special, just create the partitions and volumes so that I can try writing an ubi.img. It spits out enough information that it looks like it did work but it prints out an error nonetheless.
And of course there is the long standing issue of the reported MTD number not making any sense. But previous posts have discounted this as an issue. Here is the snippet of the error: UBI error: ubi_init: cannot attach mtd2 UBI: mtd2 is detached from ubi0 UBI error: ubi_init: UBI error: cannot initialize UBI, error -17 UBI init error -17 Here is a cleaned up version of the session log: => mtdparts device nor0 <f8000000.nor>, # parts = 8 #: name size offset mask_flags 0: config 0x00020000 0x00000000 0 1: kernel 0x00260000 0x00020000 0 2: fdt 0x00020000 0x00280000 0 3: tinyfs 0x00600000 0x002a0000 0 4: rootfs 0x076a0000 0x008a0000 0 5: u-boot-env-r 0x00020000 0x07f40000 1 6: u-boot-env 0x00020000 0x07f60000 1 7: u-boot 0x00080000 0x07f80000 1 device nand0 <f4000000.nand>, # parts = 2 #: name size offset mask_flags 0: fs1 0x20000000 0x00000000 0 1: fs2 0x20000000 0x20000000 0 => nand erase 0x0 0x40000000 NAND erase: device 0 whole chip Skipping bad block at 0x01200000 Skipping bad block at 0x0e880000 Skipping bad block at 0x1cd80000 Skipping bad block at 0x2b300000 Skipping bad block at 0x323c0000 Skipping bad block at 0x364c0000 Skipping bad block at 0x37cc0000 Erasing at 0x3ffc0000 -- 100% complete. OK => ubi part fs1 Creating 1 MTD partitions on "nand0": 0x000000000000-0x000020000000 : "mtd=0" UBI: attaching mtd2 to ubi0 UBI: physical eraseblock size: 262144 bytes (256 KiB) UBI: logical eraseblock size: 253952 bytes UBI: smallest flash I/O unit: 4096 UBI: VID header offset: 4096 (aligned 4096) UBI: data offset: 8192 UBI: empty MTD device detected UBI: create volume table (copy #1) UBI: create volume table (copy #2) UBI: attached mtd2 to ubi0 UBI: MTD device name: "mtd=0" UBI: MTD device size: 512 MiB UBI: number of good PEBs: 2045 UBI: number of bad PEBs: 3 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 0 UBI: available PEBs: 2021 UBI: total number of reserved PEBs: 24 UBI: number of PEBs reserved for bad PEB handling: 20 UBI: max/mean erase counter: 0/0 UBI error: ubi_init: cannot attach mtd2 UBI: mtd2 is detached from ubi0 UBI error: ubi_init: UBI error: cannot initialize UBI, error -17 UBI init error -17 exit not allowed from main input shell. My last sync with the denx git was when 2.6.31 was released. Here is my version: => ver U-Boot 2009.08-00213-gfdf80f7 (Dec 17 2009 - 12:57:07) Jeff Angielski The PTR Group www.theptrgroup.com _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot