Hi Fabio, > -----Original Message----- > From: Fabio Estevam [mailto:fabio.este...@nxp.com] > Sent: Wednesday, October 11, 2017 12:44 AM > To: sba...@denx.de > Cc: Peng Fan <peng....@nxp.com>; u-boot@lists.denx.de; Fabio Estevam > <fabio.este...@nxp.com> > Subject: [PATCH 2/2] mx6slevk: Remove some DM drivers > > While having DM driver is a good thing, currently this defconfig is completely > broken in a way that SD cards can not even be detected. > > Remove some of the DM drivers to avoid the regression for now and allow > booting a kernel stored in the SD card again. > > Re-adding the DM drivers can be revisited later.
When adding DM support, I have tested on my board. What issue do you see? Thanks, Peng. > > Signed-off-by: Fabio Estevam <fabio.este...@nxp.com> > --- > Applied on top of: > > https://patchwork.ozlabs.org/patch/820477/ > > and > > https://patchwork.ozlabs.org/patch/820298/ > > configs/mx6slevk_defconfig | 11 +---------- > 1 file changed, 1 insertion(+), 10 deletions(-) > > diff --git a/configs/mx6slevk_defconfig b/configs/mx6slevk_defconfig index > c876c6b..51735ec 100644 > --- a/configs/mx6slevk_defconfig > +++ b/configs/mx6slevk_defconfig > @@ -3,7 +3,7 @@ CONFIG_ARCH_MX6=y > CONFIG_TARGET_MX6SLEVK=y > # CONFIG_CMD_BMODE is not set > CONFIG_DEFAULT_DEVICE_TREE="imx6sl-evk" > - > CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6slevk/imx > image.cfg,MX6SL" > +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6slevk/im > ximage.cfg,MX6SL,SYS_I2C" > CONFIG_BOOTDELAY=3 > CONFIG_BOARD_EARLY_INIT_F=y > CONFIG_HUSH_PARSER=y > @@ -29,21 +29,12 @@ CONFIG_OF_CONTROL=y > CONFIG_ENV_IS_IN_MMC=y > CONFIG_DM=y > # CONFIG_BLK is not set > -CONFIG_DM_GPIO=y > -CONFIG_DM_I2C=y > -CONFIG_DM_MMC=y > CONFIG_CMD_PART=y > CONFIG_SPI_FLASH=y > CONFIG_SPI_FLASH_STMICRO=y > CONFIG_PHYLIB=y > CONFIG_PINCTRL=y > CONFIG_PINCTRL_IMX6=y > -CONFIG_DM_PMIC=y > -CONFIG_DM_PMIC_PFUZE100=y > -CONFIG_DM_REGULATOR=y > -CONFIG_DM_REGULATOR_PFUZE100=y > -CONFIG_DM_REGULATOR_FIXED=y > -CONFIG_DM_REGULATOR_GPIO=y > CONFIG_DM_THERMAL=y > CONFIG_USB=y > CONFIG_USB_STORAGE=y > -- > 2.7.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot