On Wed, Oct 11, 2017 at 6:55 PM, Tom Rini <tr...@konsulko.com> wrote:
> Yes, I think that's it, along with removing the default y if DM_MMC from > the BLK entry. Thanks! Ok, if I do as suggested: --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -1,7 +1,6 @@ config BLK bool "Support block devices" depends on DM - default y if DM_MMC help Enable support for block devices, such as SCSI, MMC and USB flash sticks. These provide a block-level interface which permits diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index 94050836..f4c953c 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -13,6 +13,7 @@ config MMC config DM_MMC bool "Enable MMC controllers using Driver Model" depends on DM + select BLK help This enables the MultiMediaCard (MMC) uclass which supports MMC and Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.) Then mx7dsabresd_defconfig build and boots fine. However, mx6slevk_defconfig fails to build like this: CC common/usb_storage.o common/usb_storage.c: In function ‘usb_stor_probe_device’: common/usb_storage.c:208:30: error: ‘struct usb_device’ has no member named ‘dev’ data = dev_get_platdata(udev->dev); ^ common/usb_storage.c:218:32: error: ‘struct usb_device’ has no member named ‘dev’ ret = blk_create_devicef(udev->dev, "usb_storage_blk", str, ^ I can fix it by doing: --- a/configs/mx6slevk_defconfig +++ b/configs/mx6slevk_defconfig @@ -44,6 +44,7 @@ CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y CONFIG_DM_THERMAL=y CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_USB_STORAGE=y CONFIG_USB_HOST_ETHER=y CONFIG_USB_ETHER_ASIX=y Is there a better fix for this breakage? _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot