Dear Wolfgang Denk, On Thu, Dec 17, 2009 at 11:33:07PM +0100, Wolfgang Denk wrote: > Dear Wolfgang Wegner, > [...] > > diff --git a/Makefile b/Makefile > > index 75b2c1e..924e210 100644 > > --- a/Makefile > > +++ b/Makefile > > @@ -2263,6 +2263,18 @@ M5485HFE_config : unconfig > > TASREG_config : unconfig > > @$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd > > > > +astro_mcf5373l_config \ > > +astro_mcf5373l_ram_config : unconfig > > + @if [ "$@" = "astro_mcf5373l_ram_config" ] ; then \ > > + echo "#define CONFIG_MONITOR_IS_IN_RAM" >> > > $(obj)include/config.h ; \ > > + echo "TEXT_BASE = 0x40020000" > > > $(obj)board/astro/mcf5373l/config.tmp ; \ > > + $(XECHO) "... for RAM boot ..." ; \ > > + else \ > > + echo "TEXT_BASE = 0x00000000" > > > $(obj)board/astro/mcf5373l/config.tmp ; \ > > + $(XECHO) "... for FLASH boot ..." ; \ > > + fi > > + @$(MKCONFIG) -a astro_mcf5373l m68k mcf532x mcf5373l astro > > Please keep lists sorted, and don't add such scripting to the > Makefile. It is not needed any more.
Another question here: which sorting scheme should I adhere to? With the exception of the tasreg board, all coldfire boards are sorted according to their processor number (this sorting is in turn alphabetical, not numerical, probably because it better represents the family affiliation), only the tasreg board is at the end of the list according to the alphabetical order of the board names... Best regards, Wolfgang _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
