On 12.10.2017 14:07, Bin Meng wrote:
It was observed that when booting a Ubuntu 16.04 kernel, doing ACPI
S3 suspend/resume sometimes causes the Ubuntu kernel hang forever.
The issue is however not reproduced with a kernel built from i386/
x86_64 defconfig configuration.
The unstability is actually caused by unexpected interrupts being
generated during the S3 resume. For some unknown reason, FSP (gold4)
for BayTrail configures the GPIO DFX5 PAD to enable level interrupt
(bit 24 and 25). As this pin keeps generating interrupts during an
S3 resume, and there is no IRQ requester in the kernel to handle it,
the kernel seems to hang and does not continue resuming.
Clear the mysterious interrupt bits for this pin.
Thanks for working on this. This must have been very tough to debug
and fix.
Reported-by: Stefan Roese <s...@denx.de>
Signed-off-by: Bin Meng <bmeng...@gmail.com>
Tested-by: Stefan Roese <s...@denx.de>
Reviewed-by: Stefan Roese <s...@denx.de>
Thanks,
Stefan
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
