For TI OMAP3 Beagle based Zippy expansion board from TinCanTools [1] I'm currently looking into reusing spi based ENC28J60 network driver
drivers/net/enc28j60.c It seems to me that it uses LPC2292 specific macros IO1CLR, IO1SET and IO1DIR These macros are defined in asm-arm/arch-lpc2292/lpc2292_registers.h From enc28j60.c: ... #define enc_enable() PUT32(IO1CLR, ENC_SPI_SLAVE_CS) #define enc_disable() PUT32(IO1SET, ENC_SPI_SLAVE_CS) ... ... /* configure GPIO */ (*((volatile unsigned long *) IO1DIR)) |= ENC_SPI_SLAVE_CS; (*((volatile unsigned long *) IO1DIR)) |= ENC_RESET; /* CS and RESET active low */ PUT32 (IO1SET, ENC_SPI_SLAVE_CS); PUT32 (IO1SET, ENC_RESET); ... Anybody with an idea how to move this code to some (LPC2292?) board specific files to make enc28j60.c more generic to be able to reuse it on other boards? Best regards Dirk [1] http://www.tincantools.com/product.php?productid=16147&cat=0&page=1&featured _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
